Manual dvr

6.10 Network Setup

In Setup Menu display, press ▲▼ to change the highlighted option to Network, and then press ENTER to call up Network Setup as shown.

The Network Setup allows the administrator to setup all Ethernet network related parameters. Please check with your network administrator to set these parameters correctly.

The general operations are as below:

* ▲▼◄►
Pressthese buttons to select the items.

* ESC
Press this button to escape from this screen, and return to Setup Menu display. If the Save dialog is shown, press ENTER to exit and save, ESC to exit without saving.

Following is a brief description for each item and its specific operations:

* Net Type – Static IP, PPPoE, or DHCP. DHCP can only be used for intranet (LAN) access, whileStatic IP and PPPoE can be used for both internet & intranet access. Press +/- buttons to change the Net Type.

* IP Address – Ethernet IP address for the system. To get the static IP address, please contact your local ISP (Internet Service Provider). Please follow the Text Input method described in Section 4.1 to modify these items.

* Net Mask – Net Mask for the IPaddress. Please follow the Text Input method described in Section 4.1 to modify these items.

* Gateway – Gateway IP address for the system. Please follow the Text Input method described in Section 4.1 to modify these items.

* DNS – DNS (Domain Name Server) IP address for the system. Please follow the Text Input method described in Section 4.1 to modify these items.
* Username –PPPoE username for the system if PPPoE is used. Please follow the Text Input method described in Section 4.1 to modify this item.

* Password – PPPoE password for the system if PPPoE is used. Please follow the Text Input method described in Section 4.1 to modify this item.

* DDNS Type – Dynamic, Static, or Custom DDNS (Dynamic Domain Name Server) type. Please contact yourlocal DDNS Service Provider to get the DDNS URL, username, and password. Press +/- buttons to change this item.

* URL – the URL (Uniform Resource Locators) for the system if PPPoE is used. Please follow the Text Input method described in Section 4.1 to modify this item.

* DDNS Username – DDNS username for the system if PPPoE is used. Please follow the Text Input method describedin Section 4.1 to modify this item.

* DDNS Password – DDNS password for the system if PPPoE is used. Please follow the Text Input method described in Section 4.1 to modify this item.

* E-mail – press ENTER to call up E-mail Setup. Please refer to Section 6.10.1 for the details.

* Adv. – press ENTER to call up Advanced Network Setup. Please refer to Section 6.10.2 forthe details.

6.10.1 E-mail Setup

In Network Setup, press ENTER to call up E-mail Setup as shown when the highlighted option is E-mail.

The E-mail Setup allows the administrator to set e-mail related parameters. When an event occurs and E-mail is enabled for the corresponding action, an e-mail will be sent based on the parameters set here.
The general operations are as below:

* ▲▼Press these buttons to select the items.

* ESC
Press this button to escape from this screen, and return to Network Setup display. If the Save dialog is shown, press ENTER to exit and save, ESC to exit without saving.

Following is a brief description for each item and its specific operations:

* SMTP Server – SMTP mail server name. Please follow the Text Input methoddescribed in Section 4.1 to modify this item.

* Authentication – whether the SMTP mail server requires authentication. Press ENTER or +/- to check/uncheck this item.

* Username – username if the SMTP mail server requires authentication. Please follow the Text Input method described in Section 4.1 to modify this item.

* Password – password if the SMTP mail server requires...