Manual

Typical Installation & Outline Dimensions/Model 96330

Typical Safety Valve Installation

FULL FACE FLANGE Available withdrilled full faced flange. Valve Size (Inches) A 2 3 3x4 4 4x6 6 6x8 8 8 x 10 8 x 14 7-11/16 7-1/16 7-1/16 8-3/4 8-3/4 10-3/32 12-7/32 12-7/32 12-7/32 B 7/8 1-1/8 1-1/4 1-1/4 C 1-7/8 1-7/8 1-7/8 2-21/32 2-1/2 2-1/2 2-5/8 2-5/8 2-5/8 Dimensions In Inches D 2-7/16 3-3/4 3-3/44-3/4 4-3/4 6-3/4 6-3/4 8 8 8 E 4-1/4 5-3/4 7 7 9-3/4 9-3/4 11-1/2 11-1/2 14 19 F 4-1/4 5-3/4 7 7 9-3/4 9-3/4 12 12 14-1/8 19 G 4-11/16 4-11/32 5-13/32 5-13/16 7-27/32 7-27/32 9-1/2 9-1/2 9-1/2 H 1-3/8 1-3/8 1-5/8 1-5/8 2-1/4 2-1/4 3-1/4 3-1/4 3-1/4 J 2 3 4 4 6 6 8 8 10 14 K 6-1/2 8-1/4 10 10 12-1/2 12-1/2 15 15 17-1/2 23 Note: Weights and box sizes for domestic packaging only. Approx. Net Wt.-LBS16 18 23 34 48 62 78 115 142 230 Approx. Shipping Wt. -LBS20 23 28 40 55 70 85 120 147 235 Box Size (Inches) 10 x 10 x 10 10 x 10 x 10 12 x 12 x 10 12 x 12 x 14 14 x 14 x 14 14 x 14 x 14 16 x 16 x 14 16 x 16 x 16 18 x 18 x 18 22 x 22 x 18

3-19/32 1-3/16

1-7/16 2-21/32 1-5/8 1-5/8 1-7/8 2-1/8

10-3/32 1-7/16

All designs subject to change. Certified dimensions and specificationsavailable upon request.
a n L & J T e c h n o l o g i e s C o m p a n y

5911 Butterfield Road Hillside, Illinois 60162 Phone: (708) 236-6000 Fax: (708) 236-6006
E-Mail: sales@ljtech.com http://www.ljtech.com ISO 9001 CERTIFIED

Model
PEMEX REFINACION CADEREYTA PROJECT The Consortium of SKEC/Siemens/Tribasa

Internal Safety Shutoff & Operating Valve

96330

• •

•

•

•

RELIABLE -Unique design of seals are self adjusting to any thermal or wearing condition. SAFE - Fusible plugs automatically release operating pressure in case of fire. Fail safe under all conditions, unaffected by tank or line pressure. VERSATILE - Standard valve is adaptable to ambient fluid products such as LP-Gas and/ or Ammonia. Mounts in tank, in-line housing or pipe reducer. EFFICIENT - Will operateefficiently as an operational valve for on-off service with flowand pressure in either direction. TIGHT SHUTOFF - Less than 1.0 SCFM air leakage @ 100 psi between tank and line. Bubble tight from product to hydraulic system.

The Shand & Jurs Model 96330 Internal Safety Shutoff & Operating Valve
The Shand & Jurs Model 96330 Internal Safety Shutoff and Operating Valve provides automatic,foolproof, quick acting shutoff, of product flow in tanks and manifold lines. Extremely versatile, it can be mounted in the tank, or in line. This valve is used most effectively for safety shutoff or operating valve in manifold lines. Its action is bi-directional with respect to flow and pressure, and its balanced piston design resists opening due to tank or line pressure. This valve also is ideallysuited for "switch service" of LPGAS, anhydrous ammonia, and similar products. Alternate materials of construction may be specified to meet other product requirements and operating temperatures in the range of -50° to +150°F. The Model 96330 Internal Safety Valve is designed to be held in a normally closed or open position by a springloaded balanced type piston and seat ring assembly. The valve checksclosed in either direction when operating pressure is removed. Several unique items are incorporated, each using Teflon as the sealing mechanism thus providing the most reliable quick-closing shutoff valve available. A) The piston seal is sensitive to pressure differential to seal fluid in either direction. It is self adjusting to pressure conditions, and the configuration provides ideal wipingand bearing action. B) The plunger seal is spring-loaded to adjust to wear and thermal conditions. C) The valve ring is self-aligning to assure proper seating action in a design that permits greater seating thrust than available in conventional flat scaling systems. Valve ring and seating design also incorporates a self-cleaning function. Ordering Information: Please Specify: 1. Model 96330...