Solo disponible en BuenasTareas
  • Páginas : 3 (512 palabras )
  • Descarga(s) : 0
  • Publicado : 5 de mayo de 2011
Leer documento completo
Vista previa del texto
Lower Cost of Ownership!


CC56 Electronic Register
• • • • • •
5 digit reset total 6 digit accumulative totalizer Battery powered with low battery warning Battery Saver function Acceptsinput from contact closure or solid state device Optional RATE (per min) display

In NEMA 4X enclosure mounted on TM Series flow meter

Display: 5 digit reset total Withprogrammable decimal (0, 1 or 2). Displayed on 3/8” (9.5 mm) LCD segment. 6 digit accumulative totalizer While processor tracks decimals, the totalizer displays in whole units, as decimals have nosignificance once total exceeds 1000 units. Displayed on 7/32” (5.5 mm) LCD segment. Optional RATE (volume/min) display Standard function with update every 3 sec.; activated only when requested (pleaseconsult if field activation is required). When activated, the flow rate displays alternately with reset total (press RESET during flow to switch display). When the display shows the flow rate, RATE iconappears at left. Displayed with 0 or 1 decimal. Icons • Identifiers for common units of volume: GAL for gallons LIT for liter QRT for quarts PNT for pints blank for any other unit • RATE When flow rateis displayed • BAT Low battery warning K Factor: 1.00 - 9,999

One AA 3.6V lithium battery** Life expectancy min. 24 months.
Capacitor preserves memory while battery is changed , unless thebattery has been allowed to discharge fully.

Power Saver mode extends battery life by turning the LCD off if no pulse signal has been received for 60 seconds. It powers up automatically when pulsesignals resume (or RESET button is pressed). Temperature: Processor: -40° to +158°F (-40°/+70°C). LCD : -13° to +158°F (-25°/+70°C). Between -40°F & -13°F (-40°C & -25°C), the LCD might lag behind processorvalue. Input: ** Accepts input from both contact closure (reed switch) and solid state (Hall Effect) pulsers. Ordering BATTERY POWERED as replacement or retro-fit, please specify whether for use...