Mi Pagina De Investigacion

Milano C5121
user guide

Milano C5121 User Guide

FCC Notice

This manual is based on the production version of the Kyocera
C5121 device. Software changes may have occurred after this
printing. Kyocera reserves the right to make changes in
technical and product specifications without prior notice.
The Kyocera Communications Inc. (“KCI”) products described in
this manual may includecopyrighted KCI and third party
software stored in semiconductor memories or other media.
Laws in the United States and other countries preserve for KCI
and third party software providers certain exclusive rights for
copyrighted software, such as the exclusive rights to distribute or
reproduce the copyrighted software. Accordingly, any
copyrighted software contained in the KCI products maynot be
modified, reverse engineered, distributed or reproduced in any
manner not permitted by law.
Furthermore, the purchase of the KCI products shall not be
deemed to grant—either directly or by implication, estoppel, or
otherwise—any license under the copyrights, patents, or patent
applications of KCI or any third party software provider, except
for the normal, non-exclusive royalty-freelicense to use that
arises by operation of law in the sale of a product.
Kyocera is a registered trademark of Kyocera Corporation.
Bluetooth trademarks are owned by Bluetooth SIG, Inc. and
used by Kyocera Communications Inc. under license.
microSDHC Logo is a trademark. Android, Android Market,
Google Maps, Gmail, Google Talk are trademarks of Google,
Inc. WnnIME OMRON SOFTWARE Co., Ltd.2009-2011 All
Rights Reserved. The Wi-Fi CERTIFIED Logo is a certification
mark of the Wi-Fi Alliance. The Wi-Fi Alliance Member Logo is a
logo of the Wi-Fi Alliance.
All other trademarks are the property of their respective owners.
Copyright © 2011 Kyocera Corporation. All rights reserved.
Ringer Tones Copyright © 2000-2011 Kyocera Corporation.
82-A6267-1EN, Rev. 003

This device complieswith part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
Accessories used with this device for body-worn operations
must not contain any metallic components and must provide at
least 15 mmseparation distance including the antenna and the
user’s body.
THIS MODEL DEVICE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless device is a radio transmitter and receiver. It is
designed and manufactured to not exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These
limits arepart of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.The exposure standard for wireless mobile devices employs a
unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg.*
Tests for SAR are conducted using standard operating positions
specified by the FCC with the device transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at thehighest certified power
level, the actual SAR level of the device while operating can be
well below the maximum value. This is because the device is
designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power
output.

2

Before a device model is available for...