Remote Data Manager
SITRANS RD500 Module GSM/GPRS Cellular Modem Option Card
Operating Instructions 02/2010
Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment. These warning notices are accompanied by a clarification of the level of caution to be observed.
This device/system may only be set up and operated in conjunction with this manual. Qualified personnel are only authorized to install and operate this equipment in accordance with established safety practices and standards.
Unit Repair and Excluded Liability:
• • • • The user is responsible for all changes and repairs made to the device by the user or the user’s agent. All newcomponents are to be provided by Siemens Milltronics Process Instruments Inc. Restrict repair to faulty components only. Do not reuse faulty components.
Warning: Cardboard shipping package provides limited humidity and moisture protection. This product can only function properly and safely if
it is correctly transported, stored, installed, set up, operated, and maintained. This product is intendedfor use in industrial areas. Operation of this equipment in a residential area may cause interference to several frequency based communications.
Note: Always use product in accordance with specifications. Copyright Siemens Milltronics Process Instruments Inc. 2009. All Rights Reserved
This document is available in bound version and in electronic version. We encourage users to purchaseauthorized bound manuals, or to view electronic versions as designed and authored by Siemens Milltronics Process Instruments Inc. Siemens Milltronics Process Instruments Inc. will not be responsible for the contents of partial or whole reproductions of either bound or electronic versions.
Disclaimer of Liability
While we have verified the contents of this manual for agreement with the instrumentationdescribed, variations remain possible. Thus we cannot guarantee full agreement. The contents of this manual are regularly reviewed and corrections are included in subsequent editions. We welcome all suggestions for improvement. Technical data subject to change.
MILLTRONICS®is a registered trademark of Siemens Milltronics Process Instruments Inc.
Contact SMPI Technical Publications at thefollowing address:
Technical Publications Siemens Milltronics Process Instruments Inc. 1954 Technology Drive, P.O. Box 4225 Peterborough, Ontario, Canada, K9J 7B1 Email: firstname.lastname@example.org •
European Authorized Representative
Siemens AG Industry Sector 76181 Karlsruhe Deutschland
For a selection of Siemens Milltronics level measurement manuals, go to: www.siemens.com/processautomation. Under Process Instrumentation, select Level Measurement and then go to the manual archive listed under the product family. For a selection of Siemens Milltronics weighing manuals, go to: www. siemens.com/processautomation. Under Weighing Technology, select Continuous Weighing Systems and then go to the manual archive listed under the product family.
© Siemens Milltronics ProcessInstruments Inc. 2009
SITRANS RD500 MODULE GSM/GPRS CELLULAR MODEM OPTION CARD
CONFIGURED USING SITRANS RD500 SOFTWARE INSTALLS INSIDE A SITRANS RD500 INSTALLATION AND CONNECTION HARDWARE ARE INCLUDED WITH CARD
The option card allows the user to add GSM/GPRS cellular modem capability to their SITRANS RD500. GSM/GPRS is the most prevalent cellular technology in today’s markets. GPRS can beused for services such as Wireless Application Protocol (WAP) access, Short Message Service (SMS), and for Internet communication services such as email and World Wide Web access. The modem option card is quad-band, allowing it to work in frequencies across the Americas, Europe and Asia. US and Canada work in the 850/1900 MHz bands, while Europe, Middle East, Africa and most of Asia work in the...
Leer documento completo
Regístrate para leer el documento completo.