Pasos examen de habilidad n2 de cisco modulo 2

ERouting EIGRP PT Practice SBA
A few things to keep in mind while completing this activity:
1. Do not use the browser Back button or close or reload any Exam windows during the exam.
2. Do not close Packet Tracer when you are done. It will close automatically.
3. Click the Submit Assessment button to submit your work.
Introduction
In this Packet Tracer Practice Skills-basedAssessment, you will:
* complete the configuration of a partially configured network
* establish connectivity to the West Region and the Internet through the use of static and dynamic routing
* verify connectivity
Addressing Table
Device | Interface | Address | Subnet Mask | Default Gateway |
EastHQ | S0/0/0 |  192.168.1.249 |   | N/A |
| S0/0/1 |  192.168.1.253 |  255.255.255.252 |N/A |
| S0/1/0 |  209.165.201.6 |   255.255.255.252 | N/A |
| S0/1/1 |  192.0.2.2 |   255.255.255.252 | N/A |
E-Branch1 | Fa0/0 | 192.168.0.1 | 255.255.255.128 | N/A |
| Fa0/1 | 192.168.0.129 | 255.255.255.128 | N/A |
| S0/0/0 | 192.168.1.250 | 255.255.255.252 | N/A |
| S0/0/1 | 192.168.1.245 | 255.255.255.252 | N/A |
E-Branch2 | Fa0/0 | 192.168.1.1 | 255.255.255.192 | N/A |
|Fa0/1 | 192.168.1.65 | 255.255.255.192 | N/A |
| S0/0/0 | 192.168.1.254 | 255.255.255.252 | N/A |
| S0/0/1 | 192.168.1.246 | 255.255.255.252 | N/A |
EPC1 | NIC | 192.168.0.2 | 255.255.255.128 | 192.168.0.1 |
EPC2 | NIC |  192.168.0.254 |  255.255.255.128 |  192.168.0.129 |
EPC3 | NIC | 192.168.1.2 | 255.255.255.192 | 192.168.1.1 |
EPC4 | NIC |  192.168.1.126 |  255.255.255.192 |   |NetAdmin | NIC | 192.168.1.66 | 255.255.255.192 | 192.168.1.65 |
Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.
Step 1: Configure the Device Basics.
Note: Initially, you can only access router E-Branch2 through the console connection on NetAdmin.
a.     Configure the following on E-Branch2:
         The router name is EB2.
         Theprivileged EXEC mode uses the following encrypted password: class.
(config) Enable secret class
Line console 0
Password cisco
Login
Exit
Line vty 0 4
Password cisco
Login
exit
         Enable Telnet and console line logins and use the following password: cisco.
         Configure the banner message-of-the-day as Authorized access only!Banner motd # Authorized access only! #
b.    Using the Addressing Table, configure and activate all the necessary interfaces on E-Branch2.
c.     Configure correct host IP addressing.
         Configure EPC2 with the last IP address in the subnet.
         Configure EPC4 with the last IP address in the subnet.
Step 2: Discover the Network.
a.     Explore the network to determine the IPaddress of the serial interface that EastHQ uses to connect to E-Branch2.
b.    Remotely access EastHQ.
Step 3: Configure Static and Default Routing.
a.     Configure connectivity to the West Region.
         Configure a static route on EastHQ to the entire West Region. The West Region uses the 172.16.100.0/24 address space. Use the next-hop address argument.
ip route 172.16.100.0255.255.255.0 192.0.2.1
         Configure a default route on EastHQ to send to the Internet all other traffic for destinations that are not found in the EastHQ routing table. Use the exit interface argument.
ip route 0.0.0.0 0.0.0.0 serial 0/1/0
b.    Verify static and default routing.
Step 4: Configure EIGRP Routing.
Configure EIGRP on EastHQ, E-Branch1, and E-Branch2.
a.     Use ASnumber 100.
Branch 1
Router eigrp 100
Network 192.168.1.24 0.0.0.3
Network 192.168.1.244 0.0.0.3
Network 192.168.0.0 0.0.0.127
Network 192.168.0.128 0.0.0.127
Branch 2
Router eigrp 100
Network 192.168.1.252 0.0.0.3
Network 192.168.1.244 0.0.0.3
Network 192.168.1.0 0.0.0.63
Network 192.168.1.0 0.0.0.63
b.    Do not advertise...