Portero

KVM-301 / KVM-D301
[ Operating Installation Manual ]

KC-D20 [OPTION]

KC-C63 or KC-B61 [OPTION]

KC-MB30 KVM-301 / KVM-D301 KVR-300 [OPTION]

KOREA COMMUNICATIONS CO.,LTD

1976

SINCE

http://www.kocom.com E-mail : export@kocom.co.kr This manual is based on the date as shown in the right and specifications are subject to change without notice for quality improvement
KVM-301 /KVM-D301 09.04

4" B/W Flat CRT Communication with door and door monitoring Door open during communication Intercom function between extended indoor units Surface mount type installation External 64 cut memory equipment (KVR-300) connection Connection with up to 2 door cameras, 2 monitors and 2 sub audio phone (KDP-602G) 5 melody selection

Contents
■ Cautions for safety ■ Monitor installation■ Door camera installation ■ Precautions for operation ■ Installation precautions ■ Components ■ Specifications ■ Name of each part ■ How to operate
Interlocked device Wiring Diagram [Cable requirement] Wiring Diagram [CCTV Camera A type] Wiring Diagram [CCTV Camera B type] Operational descriptions of special functions KVR-300 User's manual Installation (KVR-300) How to operate (KVR-300)

4 8 910 10 11 11 12 13 14 16 19 20 21 21 22 22 23

■ Warranty Card

4

5

6

7

Monitor Installation
Basic Installation method of Monitor
1
4X25mm Screw

Door camera Installation
Door Camera Installation
3
Rear

2

Wall hanger pannel

KC-MB30
Wall 4X25mm Screw Camera front

Wall

KC-D20
Screw (4X16mm) Camera front Screw (4X10mm)

4

5

6
Wrench WallScrew(4X10mm)

KC-C63 / KC-B61
Camera front

Rear

Rear Bracket 3X8mm Screw
4X8mm Screw Name plate

END

Camera Terminal Block Standard wire strip specification : 6~7mm Standard wire (AWG) : 16~24(0.5mm~1.2mm)

baby support Upward support

Screw(2.6X6mm)

Standard Height of Monitor
Standard height of monitor is 1,450~1,500mm from bottom to the center of monitor screen. For installation,avoid the places where there is any excessive humidity, magnetic force, dangerous chemicals, diret ray of sun, and any places near a heater which can cause break down.

After fix the rear bracket with 4 screw, put the Door Camera into the grooves of rear bracket, and then fix it with hexagon screws and stick the finishing materials.

Standard Height of Door Camera
Surface mount

Bottom base ofOne hall Box
Center of monitor

Bottom of 1 Rectangular switch box

(unit:mm)

Standard height of door camera is 1,400~1,450mm from the bottom of one camera to the floor. In case that the height of Door camera exceeds the range of min. 1,250mm ~ 1,550mm, it is impossible to control the screen picture with only the angle, and therefore, be careful of the height of camera in insrallation.
9(unit:mm)

8

Precautions for Operation

Component
Door Camera DC 15V Adapter (DCtype)

Keep away from humidifier and stove. High temperature and humidity can cause breakdown.

Do not drop monitor or door camera, and avoid strong impact.

Keep away from devices generating strong magnetic field (TV, Speaker, etc.) (Picture can be disturbed or blurred and breakdown can result)KC-MB30

KC-D20

KC-C63 or KC-B61

Monitor

4X25mm 4ea

3X8mm 1ea

Screws for fixing Monitor
4Px2 6P
4 Pin cable for camera 6 Pin cable for sub audio phone (KDP-602G) 8 Pin cable for monitor extension 2 Pin cable for Door Opener

Rear Bracket

1

KC-MB30

KC-D20

KC-C63 or KC-B61

Wall hanger bracket
When cleaning, never use wet hands, volatile benzene or paint thinner.Keep picture clear by cleaning camera window frequently with soft cloths. As this device consists of electronic precision components, and high voltage is generated internally, do not attempt to disassemble.
Wall hanger bracket is packed in the Monitor

8P 2P

4X25mm 4ea "L" Wrench 4X8mm 1ea Screws for fixing Camera

Wire

※ According to outside environment, you may view the images...