Rol del familiar cuidador de la salud del adulto frágil del centro médico leoncio amaya tume. es salud - la unión - piura.

Configurar Router (Cisco) Nuevo – Wizard de Configuración IOS Cisco
Primero: La necesidad y las decisiones de configuración básicas Layout de la red Selección de los protocolos básicos a utilizar (IP/RIP, para este caso) Segundo: Diseño de las configuraciones para los valores de los protocolos necesarios Decisiones de direccionamiento LAN Decisiones de direccionamiento WAN

Tercero: Pruebas deconectividad A nivel de capa de acceso (OSI 1/OSI2 – TCP/IP ACCESO), comandos relevantes de IOS para chequear estado de estos niveles. A nivel de capa 3 IP, tools PING de IOS CISCO y PING de OS’s Win32, comandos relevantes de IOS para chequear estado de este nivel.

LEFT
200.200.200.1/24 164.77.200.1/24 200.200.200.2/24

RIGH

10.1.1.1/24

IP:164.77.200.10/24 DG:164.77.200.1IP:10.1.1.10/24 DG:10.1.1.1

Con esto estamos preparados para seguir el Wizard de IOS CISCO para un Router Nuevo.

Wizard de IOS CISCO, Router-RIGHT Ver. System Bootstrap: 5.3.2(9) Ver. IOS: 11.2(20) Router Serie 1000, Modelo 1005

____________________________________________________________

__________

System Bootstrap, Version 5.3.2(9) [vatran 9], RELEASE SOFTWARE (fc1) Copyright (c) 1994 bycisco Systems, Inc. C1000 processor with 8192 Kbytes of main memory program load complete, entry point: 0x18060, size: 0xd5980 Notice: NVRAM invalid, possibly due to write erase. program load complete, entry point: 0x2004000, size: 0x183497 Self decompressing the image : ################################################# [OK] Restricted Rights Legend Use, duplication, or disclosure by the Governmentis subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706

Cisco Internetwork Operating System Software IOS (tm) 1005Software (C1005-BNY-M), Version 11.2(20), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Tue 05-Oct-99 12:09 by jaturner Image text-base: 0x02004000, data-base: 0x0230E304 cisco 1000 (68360) processor (revision @) with 7680K/512K bytes of memory. Processor board ID 13310396 Bridging software. X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. 1 Ethernet/IEEE802.3 interface(s) 1 Serial network interface(s) 8K bytes of non-volatile configuration memory. 2048K bytes of processor board PCMCIA flash (Read/Write) Notice: NVRAM invalid, possibly due to write erase. --- System Configuration Dialog --At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'.Would you like to enter the initial configuration dialog? [yes]: yes

First, would you like to see the current interface summary? [yes]: yes Any interface listed with OK? value "NO" does not have a valid configuration Interface Ethernet0 Serial0 IP-Address OK? Method Status unassigned NO unset up unassigned NO unset up Protocol up down

Configuring global parameters: Enter host name [Router]:Router-RIGHT The enable secret is a one-way cryptographic secret used instead of the enable password when it exists. Enter enable secret: entel The enable password is used when there is no enable secret and when using older software and some boot images. Enter enable password: *1entel Enter virtual terminal password: entel Configure SNMP Network Management? [yes]: no Configure AppleTalk? [no]: noConfigure IPX? [no]: no Configure IP? [yes]: yes Configure IGRP routing? [yes]: no Configure RIP routing? [no]: yes Configuring interface parameters: Configuring interface Ethernet0: Is this interface in use? [yes]: yes Configure IP on this interface? [yes]: yes IP address for this interface: 10.1.1.1 Number of bits in subnet field [0]: 16 Class A network is 10.0.0.0, 16 subnet bits; mask is /24...