Técnicas de estudio

Solo disponible en BuenasTareas
  • Páginas : 5 (1094 palabras )
  • Descarga(s) : 0
  • Publicado : 25 de enero de 2012
Leer documento completo
Vista previa del texto
Airpax Series 6700 Thermostat
The Airpax Series 6700 is a miniature bimetallic snap acting thermostat which provides accurate and reliable sensing and switching in a single device. Primarily developed for thermal management applications on power supplies, the Series 6700 is also ideally suited for use on crowded P.C. boards. It provides fast, positive response and excellent repeatability with 1amp switching capability at 48 VDC over its operating temperature range of 40°C to 130°C (104°F to 266°F).The operating temperature is preset at the factory and is non-adjustable in the field. The single pole/single throw switch assembly features a bimetallic element that is rated 100,000 cycles at 5 VDC 20mA resistive load.This unit features a positive snap action, available in either normallyclosed, open on rising temperature or normally open, close on rising temperature. The 6700 Thermostat dimensionally conforms to the international product package standard Y220/T0220. Thus, the 6700 may be automatically placed and soldered onto P.C. boards with high speed automated equipment, eliminating the need for the expensive hand placement and termination required today for most power supplythermostats. The nickel-plated copper mounting bracket allows this device to be directly mounted to the heat sink to sense an over-temperature condition caused by other components mounted close by or insufficient cooling due to external conditions. A plastic mounting bracket is utilized when VDE approval is required. Typical uses include turning on an indicator light, sounding an audible alarm,switching on a control circuit to send a message to a display screen or even switching a circuit to shut down a system. Applications include computers and computer peripherals, aircraft, automotive, and test equipment.


Copyright 1999 Airpax · All Rights Reserved · 00070 7/99


Contact Resistance: 50 Milliohms max. (before and after rated life) Contact Ratings: CyclesVoltage 30,000 48 VDC 30,000 120 VAC 100,000 5 VDC 100,000 5 VDC Amps (resistive) 1 1 .020 .001

Seal: Epoxy sealed for wave soldering and cleaning. Moisture proof per Airpax Spec. S-722 (unit will not leak while submerged in 9" of water for a minimum of two minutes). Vibration: Per Mil-Std-202, Method 204D, Test Condition D, 10-2,000 Hz. Shock: Per Mil-Std-202, Method 213,Test ConditionC, 100 G’s, 6 milliseconds, ⁄/™ sine wave. Chemical Resistance: Unit is resistant to water, salt, alcohol, ammonia, trichlorethane, and most other organic solvents. Solderability: Terminal material is selectively striped with 60/40 solder for improved solderability.

■ ■

Contact Operations: Either open on rise or close on rise Operating Temperature Range: 40°C (104°F) to 130°C(266°F) Standard Operating Temperature Tolerance: ±5°C (±9°F) Nominal operating temperature settings in 5°C (9°F) increments US Patent No: 4,795,997 Short Term Exposure Limit: 260°C (500°F), 10 sec. Long Term Exposure Limit: -55°C (-67°F) to 160°C (320°F) Dielectric Strength: 1480 VAC 60Hz, 1 second terminals to case for nickel-plated copper bracket. 2000 VAC 60Hz, 1 second terminals to case forplastic bracket. Insulation Resistance: 100 Megohms at 500 VDC Contact Bounce - make: 3 ms max. Weight: Approximately 0.5 grams

Resistance to Soldering Heat: Per Mil-Std-202F, Method 210A,Test Condition E.
File Numbers: UL Recognized E36687 CSA Certified LR25561 VDE Approval 11624, 2-4510-1004 (plastic bracket only)

■ ■ ■ ■

■ ■ ■ ■ ■

Seal: High temperatureepoxy Base: PPS (Polyphenylene Sulfide), 94 VO rated Terminals: 65% Copper, 18% Nickel Contacts: Gold-plated or overlay, Silver cross bar Bracket: Nickel-plated copper or high pressure laminated plastic

■ ■ ■

Airpax 6700 Series Thermostats

(10.16 ± .13) .400 ± .005 (5.08 ± .13) .200 ± .005 (3.640 ± .089) DIA .1435 ± .0035 (6.35 ± .50) .250 ± .020 (.706) REF 17.9

(4.70 ± .25) .185 ±...
tracking img