Tecnologia
Páginas: 123 (30678 palabras)
Publicado: 2 de noviembre de 2012
Technical Manuals Online! - http://www.tech-man.com
Copyright and Trademarks
© 2005 Tyco Safety Products Westminster, Westminster, MA 01441-0001 USA Printed in the United States of America. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, withoutthe express written consent of Tyco Safety Products. Tyco, Simplex, the Simplex logo, IDNet, SmartSync and WALKTEST are registered trademarks of Tyco International Services AG or its affiliates in the US and/or other countries. TrueAlarm analog smoke detection is protected by one or more of the following U.S. Patents: 5,155,468; 5,173,683; 5,543,777. IDNet addressable communications are protectedby U.S. Patent No. 4,796,025. IDNet duplicate device detection is protected under U.S. Patent No. 6,034,601. WALKTEST system test is protected under US Patent No. 4,725,818. SmartSync horn/strobe operation is protected under U.S. Patent No. 6,281,789. Two wire synchronization circuit operation is protected by U.S. patent No. 5,559,492.
Technical Manuals Online! - http://www.tech-man.com
FCCInformation
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the door of this equipment is a label that contains, among other information, the following product identifier: US:5QWAL01B4008. If requested, the number must be provided to the telephone company. In the event of equipment malfunction, all repairs should be performed by an authorizedagent. It is the responsibility of users requiring service to report the need for service to our company or to one of our authorized agents. Service can be arranged through our office at: Tyco Safety Products 91 Technology Drive Westminster, MA 01473 978-731-2500 The Ringer Equivalence Number (REN), which is 01 for the DACT installed in this panel, is used to determine the number of devices that maybe connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total number of RENs, contact the local telephone company. For products approved after July23, 2001, the REN is part of the product identifier, which uses the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g. 01 is a REN of 0.1). If the DACT causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephonecompany will notify you as soon as possible. If your service is discontinued, you will be advised of your right to file a complaint with the FCC. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make the necessarymodifications to maintain uninterrupted service. If trouble is experienced with the DACT, please contact Tyco Safety Products at the location identified above. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. Alarm Dialing Equipment This equipment must be able to seize the telephone line and place acall in an emergency situation. It must be able to do this even if other equipment (telephone, answering system, computer modem, etc.) already has the telephone line in use. To do so, the DACT must be electrically in series with and ahead of all other equipment attached to the same telephone line. Proper installation is depicted in the figure below. If you have any questions concerning these...
Copyright and Trademarks
© 2005 Tyco Safety Products Westminster, Westminster, MA 01441-0001 USA Printed in the United States of America. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, withoutthe express written consent of Tyco Safety Products. Tyco, Simplex, the Simplex logo, IDNet, SmartSync and WALKTEST are registered trademarks of Tyco International Services AG or its affiliates in the US and/or other countries. TrueAlarm analog smoke detection is protected by one or more of the following U.S. Patents: 5,155,468; 5,173,683; 5,543,777. IDNet addressable communications are protectedby U.S. Patent No. 4,796,025. IDNet duplicate device detection is protected under U.S. Patent No. 6,034,601. WALKTEST system test is protected under US Patent No. 4,725,818. SmartSync horn/strobe operation is protected under U.S. Patent No. 6,281,789. Two wire synchronization circuit operation is protected by U.S. patent No. 5,559,492.
Technical Manuals Online! - http://www.tech-man.com
FCCInformation
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the door of this equipment is a label that contains, among other information, the following product identifier: US:5QWAL01B4008. If requested, the number must be provided to the telephone company. In the event of equipment malfunction, all repairs should be performed by an authorizedagent. It is the responsibility of users requiring service to report the need for service to our company or to one of our authorized agents. Service can be arranged through our office at: Tyco Safety Products 91 Technology Drive Westminster, MA 01473 978-731-2500 The Ringer Equivalence Number (REN), which is 01 for the DACT installed in this panel, is used to determine the number of devices that maybe connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total number of RENs, contact the local telephone company. For products approved after July23, 2001, the REN is part of the product identifier, which uses the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g. 01 is a REN of 0.1). If the DACT causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephonecompany will notify you as soon as possible. If your service is discontinued, you will be advised of your right to file a complaint with the FCC. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make the necessarymodifications to maintain uninterrupted service. If trouble is experienced with the DACT, please contact Tyco Safety Products at the location identified above. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. Alarm Dialing Equipment This equipment must be able to seize the telephone line and place acall in an emergency situation. It must be able to do this even if other equipment (telephone, answering system, computer modem, etc.) already has the telephone line in use. To do so, the DACT must be electrically in series with and ahead of all other equipment attached to the same telephone line. Proper installation is depicted in the figure below. If you have any questions concerning these...
Leer documento completo
Regístrate para leer el documento completo.