Trabajo

Handheld or mechanized plasma system for
cutting and gouging metal
Capacity

Recommended
Severance
Pierce

Thickness

Cut speed

Handheld cut
3/4" (19 mm)
1" (25 mm)
1-1/4" (32 mm)
5/8" (16 mm)*

20 ipm (500 mm/min)
10 ipm (250 mm/min)
5 ipm (125 mm/min)

* Pierce rating for handheld use or with automatic torch height control

Metal removal rate

Groove profile

Gougecapacity
10.7 lbs. (4.8 kg) per hour

.14" (3.5 mm) D x .26" (6.6 mm) W

Key power supply advantages

Duramax torch styles

H65 75° hand torch

• mart Sense™ technology automatically adjusts the gas pressure according
S
to cutting mode and torch lead length for optimal performance.
• oost Conditioner™ circuit (on CSA models) improves performance on
B
low‑line voltage, motorgenerators, and fluctuating input power.

H65s 15° hand torch

• astConnect™ torches, CNC interface, and four work lead styles increase
F
versatility for handheld and mechanized use.
• implified control panel with LCD screen for easy operation.
S

M65 full-length machine torch

Key torch advantages
• 5° and 75° Duramax™ series hand torches enable operators to easilyselect
1
the right tool for the job. The handle is more heat resistant and performs at
least five times longer in high impact tests than previous torches.

M65m mini-machine torch

• tandard and short‑barreled Duramax series machine torches allow a wide
S
variety of mechanized applications with X‑Y tables, track systems, pipe and
robotic cutting systems.

Relative cut performance onmild steel
150% faster on
1/2" (12 mm)

• onical Flow™ nozzle increases arc energy density for superior cut quality
C
with little dross.
• atent pending shield reduces dross buildup and enables smoother drag
P
cutting for a better cut.

Cut speed

Powermax65
Oxyfuel

1/2" (12 mm)
Thickness

5/8" (16 mm)

3/4" (19 mm)

Specifications
Input voltages
Input current @9 kW

Output current
Rated output voltage
Duty cycle @ 40° C (104° F)

Open circuit voltage (OCV)
Dimensions with handles
Weight with 25' (7.6 m) torch
Gas supply
Recommended gas inlet
flow rate / pressure
Input power cable length
Power supply type

Ordering information
CSA 200 – 480 V, 1-PH, 50/60 Hz
200 – 600 V, 3-PH, 50/60 Hz
CE 400 V, 3-PH, 50/60 Hz
CSA 200/208/240/480 V,1-PH
52/50/44/22 A
200/208/240/480/600 V, 3-PH
32/31/27/13/13 A
CE 380/400 V, 3-PH
15.5/15 A
20 – 65 A
139 VDC
CSA 50% @ 65 A, 230 – 600 V, 1/3-PH
40% @ 65 A, 200 – 208 V, 1/3-PH
100% @ 46 A, 230 – 600 V, 1/3-PH
CE 50% @ 65 A, 380/400 V, 3-PH
100% @ 46 A, 380/400 V, 3-PH
CSA 295 VDC
CE 270 VDC
19.7" (500 mm) D; 9.2" (234 mm) W;
17.9" (455 mm) H
CSA 64 lbs (29 kg)
CE 57 lbs (26 kg)Clean, dry, oil-free air or nitrogen
Cutting: 400 scfh, 6.7 scfm (189 l/min)
@ 85 psi (5.6 bar)
Gouging: 450 scfh, 7.5 scfm (212 l/min)
@ 70 psi (4.8 bar)
10' (3 m)
Inverter – IGBT

Below are some of the most common system configurations which include a power supply, torch and work
cable. Additional configurations are listed on our website.

Standard
power supply
Input voltages
200– 600 V CSA2
400 V CE3
2
3

System output
(amps)
65
65
40
40
30

Performance
(arc stretch)
Full
Limited
Full
Limited
Full

Cut chart
Material
Mild steel

Stainless steel

Aluminum

1

Thickness
(inches)
(mm)
10 GA
3
1
6
⁄4
1
12
⁄2
3
19
⁄4
1
25
10 GA
3
1
6
⁄4
1
12
⁄2
3
19
⁄4
1
6
⁄4
1
12
⁄2
3
19
⁄4

Current
(amps)
45
65
65
6565
45
65
65
65
65
65
65

Maximum
cut speed1
(ipm) (mm/min)
205
5000
145
3900
50
1430
24
610
13
350
168
4200
120
3800
40
1150
19
490
190
5500
60
1660
30
770

Maximum cut speeds are the results of Hypertherm’s laboratory testing. For optimum cut
performance, actual cutting speeds may vary based on different cutting applications. Refer to the
operator manual...