Triplite Low Power Profile

. r te RE lite gis a F ripp t Re in w to

TY N chan ww AN TIO r a duct R A fo o AR STR day te pr ranty W I to Li ar G ne p /w RE onli E Trip com

ce w.

Owner’s Manual

5U Low-Profile Wall-Mount SmartRack™ Enclosure
Model: SRWF5U

Table of Contents
1. 2. 3. Important Safety Instructions Overview Feature Identification 2 2 3 4 4 4 5 5 5 5 6 6 6. Wall Mounting the Enclosure 6.1 Mounting7. 8. 9. Equipment Installation Optional Patch Panel Installation Specifications 6 6 7 7 7 8 8 9

4. Enclosure Installation 4.1 Preparation 4.2 Unpacking 5. 5.1 5.2 5.3 5.4 5.5 Enclosure Configuration Door Locks Cable Access & Management Reversing the Front Door Mounting Rails Adjusting Mounting Rail Depth

10. Storage and Service 11. Warranty & Warranty Registration Español

1111 W. 35thStreet, Chicago, IL 60609 USA www.tripplite.com/support
Copyright © 2011 Tripp Lite. All trademarks are the sole property of their respective owners.

201107089-93-3126-EN.indd 1

8/3/2011 9:06:04 AM

1. Important Safety Instructions
SAVE THESE INSTRUCTIONS
This Manual contains instructions and warnings that must be followed during the installation and operation of the product describedin this manual. Failure to comply may invalidate the warranty and cause property damage or personal injury.

• Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive contaminants, dust and direct sunlight. • Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover orinsert objects into the external ventilation openings of the enclosure. • The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container. • Do not place any object on the enclosure, especially containers of liquid, and donot attempt to stack the enclosures. • Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged. • Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible. • Install the enclosure in a structurally sound area capable of handling the load, or on a level floor that is ableto bear the weight of the enclosure, all equipment that will be installed in the enclosure and any other enclosures and/or equipment that will be installed nearby. • Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty. • Save all packing materials for later use. Repacking and shipping the enclosure without the original packingmaterials may cause product damage that will void the warranty. • Do not reship the enclosure with additional equipment unless the enclosure was shipped with a special shock pallet (“SP1” models only). The combined weight of the enclosure and installed equipment must not exceed the load capacity of the pallet. Tripp Lite is not responsible for any damage that occurs during reshipment. • Use ofthis equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

2. Overview
The SRWF5U Low-Profile Wall-Mount SmartRackEnclosure provides convenient and secure vertical mounting for all standard 19-inch rackmount equipment, regardless of vendor, and ships fully assembled for quick and easy deployment.

2

201107089-93-3126-EN.indd 2

8/3/2011 9:06:04 AM

3. Feature Identification
6

5

3 2

8

5 4

8

7

7 6 7 6

1

1 2 3 4 5 6 7 8

Front Door Top Panel Door Horizontal Mounting Rails...