Vxwork

|HISTORICAL |
|Release|Comments |
|V1.0 April 16, 2002 |Initial release.|
| ||
| ||


Example for MXP64GX: (apply for other product with BSB support)

1- Erase completely the Cflash disk with FDISK.

2- Create a fresh partition and format it.3- From you working station, download the Tornado BSP into ROOT directory where Tornado was previously installed.

4- To use the network, edit config.h located in:(windbase)\target\config\teknorPCI-mxp64gx\config.h

5- Change "if false" for "if true". PS: Look also for reference at the bottom on how to boot from Cflash.

6- From DOS shell, go into: (windbase)\host\x86-win32\bin, executethe batch file "torVars.bat".

7- From DOS shell, go into: (windbase)\target\config\ teknorPCI-mxp64gx\ and compile the image "vxWorks.st" using the command line: make vxWorks.st

8- Then do:"make bootrom" and then rename: the file "bootrom" to "bootrom.dat".

9- Boot from floppy under DOS with Cflash configured as Primary Master.

10- From floppy, execute "VxSys c :".

11- Reboot youstation as Win9x instead of DOS. (Cflash will be now drive D:).

12- Copy "VxCopy.exe"into current directory where bootrom.dat is located.

13- Fron DOS shell, execute: "VxCopy bootrom.dat...