Manuales plc honeywell hc900

Honeywell HC900 Ethernet
Driver Help
© 2011 Kepware Technologies
Honeywell HC900 Ethernet Driver Help
Table of Contents
Table of Contents 2
Honeywell HC900 Ethernet Driver Help 4
Overview 4
Device Setup 5
TCP/IP 6
Settings 6
Block Sizes 7
Data Types Description 8
Automatic Tag Database Generation 9
Tag Generation 9
Tag Generation SP Programmer Details 11
Tag Import 11
Add ImportFile 13
Creating Tag Import Files 14
Address Descriptions 18
Output Coils 18
Input Coils 18
Internal Registers 18
Holding Registers 19
Optimizing Your Honeywell HC900 Ethernet Communications 21
Error Descriptions 22
Address Validation 22
Missing address 22
Device address '' contains a syntax error 23
Address '' is out of range for the specified device or register 23
Device address ''is not supported by model '' 23
Data Type '' is not valid for device address '' 23
Device address '' is Read Only 23
Array size is out of range for address '' 23
Array support is not available for the specified address: '' 24
Device Status Messages 24
Device '' is not responding 24
Unable to write to '' on device '' 24
Device Specific Messages 24
Failure to initiate 'winsock.dll' 25
Badaddress in block [x to y] on device '' 25
Bad received length [x to y] on device '' 25
Tag Import Specific Messages 25
www. kepware.com
2
Honeywell HC900 Ethernet Driver Help
Could not read record -Buffer length exceeded 25
No tags imported-Unsupported file format 26
Could not parse expected data (field , record ) 26
Invalid decimal address (field , record ) 26
Invalid tag name '' (field, record ) could not be coerced into valid name 26
Invalid tag name '' (field , record ) changed to '' 27
Invalid datatype (field , record ) 27
Invalid access (field , record ) 27
Invalid type (field , record ) 27
Invalid tag type (field , record ) 28
Could not import tag in record -unknown block name 28
Invalid block name '' (field , record ) could not be coerced 28
Invalid block name ''(field , record ) changed to '' 28
Index 29
www. kepware.com
3
Honeywell HC900 Ethernet Driver Help
Honeywell HC900 Ethernet Driver Help
Help version 1.021
CONTENTS
Overview
What is the Honeywell HC900 Ethernet Driver?
Device Setup
How do I configure a device for use with this driver?
Data Types Description
What data types does the Honeywell HC900 Ethernet driver support?
AutomaticTag Database Generation
How can I easily configure tags for the Honeywell HC900 Ethernet driver?
Address Descriptions
How do I reference a data location in a Honeywell HC900 Ethernet device?
Optimizing Your Honeywell HC900 Ethernet Communications
How do I get the best performance from the Honeywell HC900 Ethernet driver?
Error Descriptions
What error messages does the Honeywell HC900Ethernet driver produce?
Overview
The Honeywell HC900 Ethernet Driver provides an easy and reliable way to connect Honeywell HC900 Ethernet
controllers to OPC Client applications, including HMI, SCADA, Historian, MES, ERP and countless custom applications.
It is intended for use with Honeywell HC900 Hybrid Controllers and similar devices.
www. kepware.com
4
Honeywell HC900 Ethernet Driver HelpDevice Setup
Supported Devices
HC900 Hybrid Controller
Communication Protocol
Modbus Ethernet using Winsock V1.1 or higher.
Connection Timeout
This parameter specifies the time that the driver will wait for a connection to be made with a device. Depending
on network load, the connect time may vary with each connection attempt. The default setting is 3 seconds. The
valid range is 1 to 60seconds.
Request Timeout
This parameter specifies the time that the driver will wait on a response from the device before giving up and
going on to the next request. Longer timeouts only affect performance if a device is not responding. The default
setting is 1000 milliseconds. The valid range is 50 to 30000 milliseconds.
Retry Attempts
This parameter specifies the number of times the driver...