Carrier

Solo disponible en BuenasTareas
  • Páginas : 76 (18756 palabras )
  • Descarga(s) : 0
  • Publicado : 19 de febrero de 2012
Leer documento completo
Vista previa del texto
40MVC / 38MVC 40MVQ / 38MVQ High---Wall Duct Free Split System Sizes 009 to 024

Product Data

INDUSTRY LEADING FEATURES / BENEFITS
AN INEXPENSIVE AND CREATIVE SOLUTION TO DESIGN PROBLEMS.
The 38/40MVC(Q) series duct-free split systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires. The fan coil is mountedon the wall, near the ceiling. This selection of fan coils permits inexpensive and creative solutions to design problems such as:

S S S S S
the environmentally sound refrigerant

Add-ons to current space (an office or family room addition) Special space requirements When changes in the load cannot be handled by the existing system. When adding air conditioning to spaces that are heated byhydronic or electric heat and have no ductwork. Historical renovations or any application where preserving the look of the original structure is essential.

The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork.

These compact indoor fan coil units take up very little space in the room and do not obstruct windows. The fan coils areattractively styled to blend with most room decors. Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels.

LOW SOUND LEVELS
When noise is a concern, the duct-free split systems are the answer. The indoor units are whisper quiet. There are no compressors indoors, either in the conditioned space or directly over it, and there is none ofthe noise usually generated by air being forced through ductwork. When sound ordinances and proximity to neighbors demand quiet operation, the 38MVC,MVQ unit is the right choice: The advanced, horizontal airflow design distributes air more evenly over the coil.

BUILT- IN RELIABILITY Duct-free split system indoor and outdoor units are designed to provide years of trouble-free operation. The highwall indoor units include protection against freeze-up and high evaporator temperatures on heat pumps. The condensing units and heat pumps are also protected. There is a three minute time delay before the compressor will start. The compressor is also protected by the over-current protection. On size 18k and 24k heat pumps, there is high temperature protection.

SECURE OPERATION
If security isan issue, outdoor and indoor units are connected only by refrigerant piping and wiring to prevent intruders from crawling through ductwork. In addition, since 38MVC,MVQ units can be installed close to an outside wall, coils are protected from vandals and severe weather.

INDIVIDUAL ROOM COMFORT
Maximum comfort is provided because each space can be controlled individually based on usage pattern.The air sweep feature provided permits optimal room air mixing to eliminate hot and cold spots for occupant comfort. In addition, year-round comfort can be provided with heat pumps.

38/40MVC, MVQ

FAST INSTALLATION
This compact duct-free split system is simple to install. A mounting bracket is standard with the indoor units and only wire and piping need to be run between indoor and outdoorunits. These units are fast and easy to install ensuring minimal disruption to customers in the home or workplace. This makes the 38/40MVC,MVQ duct-free split systems the equipment of choice, especially in retrofit situations.

ECONOMICAL OPERATION
The duct-free split system design allows individual room heating or cooling when required. There is no need to run large supply-air fans or chilledwater pumps to handle a few spaces with unique load patterns. In addition, because air is moved only in the space required, no energy is wasted moving air through ducts.

EASY-TO-USE CONTROLS
The high-wall units have microprocessor-based controls to provided the ultimate in comfort and efficiency. The user friendly wireless remote control provides the interface between user and the unit....
tracking img