Curso Básico de Construcción de un motor Bedini

Curso Básico de Construcción de un motor Bedini
Noviembre 2013
Por Arturo Cano Jaraba

Introducción

A QUÉ LLAMAMOS MOTOR BEDINI

John Bedini 1984

SSG – Esquema de John Bedini

SSGmotor (Simplified School Girl motor)

SG motor (school girl motor)

Motor BEDINI

¿ES «OVERUNITY» ESTE MOTOR?

¿es «overunity» este motor?

No, nunca vas a obtener del
motor más energíade la
que pongas. Da igual cómo
lo midas.

TUV test

¡John Bedini dice que puedes cargar cuatro baterías
al precio de una!

TUV test
BATTERY TEST FOR THE BEDINI MOTOR GENERATOR
DATE :OCTOBER 13, 2000
BATTERY TEST SEQUENCE:
One lead acid gel-cell (12 volts, 450 milliamps) is being utilized as the primary source fully charged at 12.5 volts.
Three (3) lead acid gel-cell batteries (12volt, 450 milliamps) strapped in parallel are being used as the charge
destination. The batteries are discharged to 10 volts for the test purposes.
Test #1 starts at 10:45 AM utilizing primarybattery fully charged at 12.5 volts charging three (3) destination
batteries paralleled. The destination batteries reach a charge capacity of 14 volts at 11:20 AM.
The destination batteries are thendischarged to 10 volts under working load to prepare for Test #2.
Test #2 starts at 11:25 AM utilizing primary battery measured at 11.5 volts. Charging three (3) destination
batteries paralleled. Thedestination batteries reach a charge capacity of 14 volts at 12:50 PM.
The destination batteries are then discharged to 10 volts under working load to prepare for Test #3.
Test #3 starts at 1:00 PMutilizing primary battery measured at 10.5 volts. Charging three (3) destination
batteries paralleled. The destination batteries reach a charge capacity of 14 volts at 1:40 PM.
The destinationbatteries are then discharged to 10 volts under working load to prepare for Test #4.
Test #4 starts at 2:05 PM utilizing primary battery measured at 9.5 volts. Charging three (3) destination
batteries...