Datasheet

MM74HC132 Quad 2-Input NAND Schmitt Trigger

September 1983 Revised January 2005

MM74HC132 Quad 2-Input NAND Schmitt Trigger
General Description
The MM74HC132 utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as well as the capability to drive 10 LS-TTL loads. The 74HC logic family is functionally and pinoutcompatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.

Features
s Typical propagation delay: 12 ns s Wide power supply range: 2V–6V s Low quiescent current: 20 µA maximum (74HC Series) s Low input current: 1 µA maximum s Fanout of 10 LS-TTL loads s Typical hysteresis voltage: 0.9V at VCC=4.5VOrdering Code:
Order Number MM74HC132M MM74HC132MX_NL MM74HC132SJ MM74HC132MTC MM74HC132N Package Number M14A M14A M14D MTC14 N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Pb-Free 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Thin ShrinkSmall Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. (Tape and Reel not available in N14A.) Pb-Free package per JEDEC J-STD-020B.

Connection Diagram
Pin Assignment for DIP, SOIC, SOP, and TSSOP

Logic DiagramTop View

© 2005 Fairchild Semiconductor Corporation

DS005309

www.fairchildsemi.com

MM74HC132

Absolute Maximum Ratings(Note 1)
(Note 2) Supply Voltage (VCC) DC Input Voltage (VIN) DC Output Voltage (VOUT) Clamp Diode Current (IIK, IOK) DC Output Current, per pin (IOUT) DC VCC or GND Current, per pin (ICC) Storage Temperature Range (TSTG) Power Dissipation (PD) (Note 3) S.O. Packageonly Lead Temperature (TL) (Soldering 10 seconds) 260°C (Note 4) 600 mW 500 mW

Recommended Operating Conditions
Min Supply Voltage (VCC) DC Input or Output Voltage (VIN, VOUT) Operating Temperature Range (TA) 2 0 Max 6 VCC Units V V

−0.5 to +7.0V −1.5 to VCC +1.5V −0.5 to VCC +0.5V ±20 mA ±25 mA ±50 mA −65°C to +150°C

−40

+125

°C

Note 1: Absolute Maximum Ratings are those valuesbeyond which damage to the device may occur. Note 2: Unless otherwise specified all voltages are referenced to ground. Note 3: Power Dissipation temperature derating — plastic “N” package: − 12 mW/°C from 65°C to 85°C.

DC Electrical Characteristics
Symbol VT+ Parameter Positive Going Threshold Voltage

Conditions Min

VCC 2.0V 4.5V 6.0V

TA = 25°C Typ 1.0 2.0 3.0 1.5 3.15 4.2 0.3 0.9 1.21.0 2.2 3.0 0.2 0.4 0.5 1.0 1.4 1.5 2.0 4.5 6.0 4.2 5.7 0 0 0 0.2 0.2 1.9 4.4 5.9 3.98 5.48 0.1 0.1 0.1 0.26 0.26 ±0.1 2.0

TA = -40 to 85°C TA = -40 to 125°C Guaranteed Limits 1.0 2.0 3.0 1.5 3.15 4.2 0.3 0.9 1.2 1.0 2.2 3.0 0.2 0.4 0.5 1.0 1.4 1.5 1.9 4.4 5.9 3.84 5.34 0.1 0.1 0.1 0.33 0.33 ±1.0 20 1.0 2.0 3.0 1.5 3.15 4.2 0.3 0.9 1.2 1.0 2.2 3.0 0.2 0.4 0.5 1.0 1.4 1.5 1.9 4.4 5.9 3.7 5.20.1 0.1 0.1 0.4 0.4 ±1.0 40

Units V V V V V V V V V V V V V V V V V V V V V V V V V V V V µA µA

Max

2.0V 4.5V 6.0V

VT−

Negative Going Threshold Voltage

Min

2.0V 4.5V 6.0V

Max

2.0V 4.5V 6.0V

VH

Hysteresis Voltage

Min

2.0V 4.5V 6.0V

Max

2.0V 4.5V 6.0V

VOH

Minimum HIGH Level Output Voltage

VIN = VIH or VIL |IOUT| ≤ 20 µA VIN = VIH or VIL |IOUT| ≤4.0 mA |IOUT| ≤ 5.2 mA

2.0V 4.5V 6.0V 4.5V 6.0V 2.0V 4.5V 6.0V 4.5V 6.0V 6.0V 6.0V

VOL

Maximum LOW Level Output Voltage

VIN = VIH or VIL |IOUT| ≤ 20 µA VIN = VIH or VIL |IOUT| ≤ 4.0 mA |IOUT| ≤ 5.2 mA

IIN ICC

Maximum Input Current Maximum Quiescent Supply Current

VIN = VCC or GND VIN = VCC or GND IOUT = 0 µA

Note 4: For a power supply of 5V ±10% the worst case output...