Quick Installation Guide+ Installations-Anleitung+ Guide d’installation+ Guía de instalación+ Guida di Installazione+ Installatiehandleiding+ Instrukcja instalacji+ Instalační příručka+ Telepítési Segédlet+ Installasjonsveiledning+ Installationsvejledning+ Asennusopas+ Installationsguide+ Guia de Instalação+ Οδηγός Γρήγορης Εγκατάστασης το+ Vodič za brzu instalaciju+ Kratka navodila zanamestitev+ Ghid de instalare rapidă+
Quick Installation Guide
WIRELESS G ADSL2+ MODEM ROUTER
If any of the items are missing, please contact your reseller.
DSL-2640R WIRELESS G ADSL2+ MODEM ROUTER
CD-ROM Ethernet (CAT-5e) (D-Link Click’n Connect. Cable Manual and Warranty)
Default IP: 192.168.1.1 Default Username:admin Default Password: admin
Using a power supply with a different voltage rating will damage and void the warranty of this product.
Remove the D-Link Click and Connect CD.
A. Be sure your Internet connection is active. DO NOT plug the router in yet. B. Insert the D-Link Click’n Connect CD into your computer.
1. How do I configure my DSL-2640R router without the CD, or check my Wireless Network Name (SSID) and Wireless Encryption Key? • Connect your PC to the router using an Ethernet cable. • Open a web browser and enter the address http://192.168.1.1 • The default username is ‘admin’. The default password is also ‘admin’. • If you have changed the password and can not remember it, you will needto reset the router to the factory default setting (steps in question 2), which will set the password back to ‘admin’. 2. How do I reset my router to the factory default settings? • Ensure the router is powered on. • Press and hold the reset button on the back of the device for approximately 6-8 seconds. • The process would take about 30 seconds to complete. Note: Resetting the router to thefactory default will erase the current configuration settings. To reconfigure your settings, log into the router as outlined in question 1, then run the Setup Wizard. 3. How do I add a new wireless client or PC if I have forgotten my Wireless Network Name (SSID) or Wireless Encryption Key? • For every PC that needs to connect to the router wirelessly, you will need to ensure you use the same WirelessNetwork Name (SSID) and encryption key as the DSL router has. • Use the web based user interface (as described in question 1 above) to check or choose your wireless settings. • Make sure you take a note of the settings so that you can enter them into each wirelessly connected PC. D-Link has provided a handy sticker for you to note them down and attach to your router, or other location you find mostconvenient. 4. What can I do if my router is not working correctly? • The manual contains a full troubleshooting section and can be downloaded from the D-Link website (see below), however there are a few quick steps you can take to try and resolve any issues: • Check the LED’s on the front of the router. The Power, WLAN, DSL and Internet LED should be on. One or more of the LAN LED should flash.• Check that all the cables are firmly connected at both ends. • Power the router off for 20 seconds, and then power it back on. 5. Why can I not get an Internet Connection? • For ADSL ISP users please contact your ISP to make sure the service has been enabled/ connected by your ISP and that your ISP username and password are correct. Technical Support Thank you for choosing D-Link products. Forfurther information, support, product updates or to download the User Manual please visit the D-Link website at www.dlink.eu.
: 08456 12 0003 3
Important information regarding your internet subscription
Users who subscribe to limited or “pay as you use” broadband internet access. In the WAN configuration settings, there is a parameter called Maximum...