E100btxfx05.pdf

Fast Ethernet 100BASE-TX to 100BASE-FX
Stand-Alone Media Converters
E-100BTX-FX-05(xxxx)
Convert 100BASE-TX to 100BASE-FX
Extend Network Distance Used in pairs, this media converter can extend distances between two twisted pair switches or a switch and a server up to 2 km over multimode fiber or up to 120 km over single mode fiber. Connect Remote Devices Using one media converter, a switchwith a copper port can be connected to a switch with an existing fiber interface.

Extend Network Distance

Specifications
Standards IEEE Std. 802.3™ 100BASE-FX, 100BASE-TX

Fiber Optic Connector Specs
E-100BTX-FX-05; E-100BTX-FX-05(SC); E-100BTX-FX-05(LC)

Min TX PWR: -19.0 dBm Max TX PWR: -14.0 dBm RX Sensitivity: -30.0 dBm Max In PWR: -14.0 dBm Link Budget: 11.0 dB Min TX PWR: -19.0 dBmMax TX PWR: -14.0 dBm RX Sensitivity: -33.5 dBm Max In PWR: -14.0 dBm Link Budget: 14.5 dB Min TX PWR: -15.0 dBm Max TX PWR: -8.0 dBm RX Sensitivity: -31.0 dBm Max In PWR: -8.0 dBm Link Budget: 16.0 dB Min TX PWR: -15.2 dBm Max TX PWR: -8.0 dBm RX Sensitivity: -32.5 dBm Max In PWR: -3.0 dBm Link Budget: 17.3 dB Min TX PWR: -8.0 dBm Max TX PWR: -2.0 dBm RX Sensitivity: -34.0 dBm Max In PWR: -7.0dBm Link Budget: 26.0 dB Min TX PWR: -5.0 dBm Max TX PWR: 0.0 dBm RX Sensitivity: -34.0 dBm Max In PWR: -7.0 dBm Link Budget: 29.0 dB Min TX PWR: 0.0 dBm Max TX PWR: +5.0 dBm RX Sensitivity: -36.0 dBm Max In PWR: -3.0 dBm Link Budget: 36.0 dB

E-100BTX-FX-05(MT)

E-100BTX-FX-05(SM)

E-100BTX-FX-05 (SMLC)

Features Operates under heavy traffic loads without excess heat, so there is no needfor a failure-prone internal fan Round trip delay of only 40 bit times —far below the Class II rating of 92 bit times Auto-Negotiation see next pages AutoCross™ see next pages

Link Pass Through see next pages Far End Fault (FEF) see next pages Automatic Link Restoration next pages Pause see next pages The converters will automatically re-establish link when connected to two 10/100autonegotiating switches if link is lost. With other manufacturers’ converters the user must intervene to re-establish link.
E-100BTX-FX-05(XL); E-100BTX-FX-05(LW) E-100BTX-FX-05(LH)

E-100BTX-FX05(XLW)

Ordering Info
Product Number E-100BTX-FX-05 Port One 100BASE-TX (RJ-45) [100 m/328 ft.] 100BASE-TX (RJ-45) [100 m/328 ft.] 100BASE-TX (RJ-45) [100 m/328 ft.] 100BASE-TX (RJ-45) [100 m/328 ft.] 100BASE-TX(RJ-45) [100 m/328 ft.] 100BASE-TX (RJ-45) [100 m/328 ft.] 100BASE-TX (RJ-45) [100 m/328 ft.] 100BASE-TX (RJ-45) [100 m/328 ft.] 100BASE-TX (RJ-45) [100 m/328 ft.] 100BASE-TX (RJ-45) [100 m/328 ft.] Port Two 100BASE-FX 1300nm multimode (ST) [2 km/ 1.2 miles] 100BASE-FX 1300nm multimode (SC) [2 km/ 1.2 miles] 100BASE-FX 1300nm multimode (LC) [2 km/ 1.2 miles] 100BASE-FX 1300nm multimode (MT-RJ) [2km/ 1.2 miles] 100BASE-FX 1310nm single mode (SC) [20 km/12.4 miles] 100BASE-FX 1310nm single mode (LC) [20 km/12.4 miles] 100BASE-FX 1310nm single mode (SC) [40 km/24.9 miles] 100BASE-FX 1310nm single mode (SC) [60 km/37.3 miles] 100BASE-FX 1550nm single mode (SC) [80 km/49.7 miles] 100BASE-FX 1550nm single mode (SC) [120 km/74.6 miles] Product Number Port One Port Two Single Fiber Products Note:Recommended use in pairs (see next pages) E-100BTX-FX100BASE-TX 100BASE-FX 1310nm 05(100) (RJ-45) TX / 1550nm RX sin[100 m/328 ft.] gle fiber single mode (SC) [20 km/12.4 miles] E-100BTX-FX100BASE-TX 100BASE-FX 1550nm 05(101) (RJ-45) TX / 1310nm RX sin[100 m/328 ft.] gle fiber single mode (SC) [20 km/12.4 miles] E-100BTX-FX100BASE-TX 100BASE-FX 1310nm 05(102) (RJ-45) TX / 1550nm RX sin[100 m/328ft.] gle fiber single mode (SC) [40 km/ 24.9 miles] E-100BTX-FX100BASE-TX 100BASE-FX 1550nm 05(103) (RJ-45) TX / 1310nm RX sin[100 m/328 ft.] gle fiber single mode (SC) [40 km/ 24.9 miles]

Single Fiber Products
E-100BTX-FX-05 (100); E-100BTX-FX-05(101)

Min TX PWR: -13.0 dBm Max TX PWR: -6.0 dBm RX Sensitivity: -32.0 dBm Max In PWR: -3.0 dBm Link Budget: 19.0 dB Min TX PWR: -8.0 dBm Max TX...