Equipos Radwin

Agenda
In this presentation we explain how to complete the link commissioning and troubleshoot it in case of an error We shall use an example of a plan that consists of 4 links

» » » » » » » »Making the links operational Analyzing Mutual Interferences Link Budget Calculation Frequency Assignment Service Evaluation Service Evaluation: Fault Finding Radio Parameters: Adjusting ThresholdsLOS Coverage

Confidential Information | RADWIN Training Center

1

Getting started
In the image below we see 4 links which are down, most likely for two reasons:
» » Interferences LinkService conflict: Actual VS. Required

Site C

Site B Site A

Site D

Confidential Information | RADWIN Training Center

2

Making the links Operational
We can commission these links easilyby applying the tips & techniques we studied in the previous presentation:

» »

In each site we create an East-West difference of ~3 meters in height We make sure the actual service matches therequirement

Re-position the radios

Adjust the service capacity according to the plan requirements: Required < Actual
3

Confidential Information | RADWIN Training Center

Making thelinks Operational
Now that the links seem operational, we can proceed with the Plan. Our next steps are:
» » » » Analyzing the mutual interferences Link Budget Calculation Frequency Assignment ServiceEvaluation

Confidential Information | RADWIN Training Center

4

Analyzing Mutual Interferences
To read the actual interferences of all sites, click on the 3rd tab and then click on “MutualInterferences”
Click on “Edit” to reduce/eliminate the interferences of each site

Confidential Information | RADWIN Training Center

5

Link Budget Calculation
Click on the 5th tab(“Output”) and expand the “Link Budget” feature to explore the links’ services:
» » » » Channel BW Rate RSSI (local and remote) Service throughput

Should you need to refine the actual reading, click on...