Extractores De Humo

BRITISH STANDARD

Smoke and heat control
systems —

Licensed copy:Butler and Young Ltd, 12/05/2006, Uncontrolled Copy, © BSI

Part 3: Specification for powered smoke
and heat exhaust ventilators

The European Standard EN 12101-3:2001 has the status of a
British Standard

ICS 13.220.20; 23.120

NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW

BS EN12101-3:2002

BS EN 12101-3:2002

National foreword
This British Standard is the official English language version of EN 12101-3:2002.
EN 12101-3:2002 is a candidate “harmonized” European Standard and fully takes into
account the requirements of the European Commission mandate M109, Fire
alarm/detection, fixed firefighting, fire and smoke control and explosion suppression
products, given underthe EU Construction Products Directive (89/106/EEC), and
intended to lead to CE marking. The date of applicability of EN 12101-3:2002 as a
“harmonized” European Standard, i.e. the date after which this standard may be used
for CE marking purposes, is subject to an announcement in the Official Journal of the
European Communities.
EN 12101-3:2002 is the subject of transitional arrangementsagreed under the
European Commission mandate. The Member States have agreed a nominal transition
period for the co-existence of EN 12101-3:2002 and their corresponding a national
standard(s). It is intended that this period will comprise a nominal nine month period
during which any required changes to national regulations are to be made, followed by
a further nominal twelve month period for theimplementation of CE marking. At the
end of this co-existence period, the national standard(s) will be withdrawn. In the UK,
the corresponding national standard is:

Licensed copy:Butler and Young Ltd, 12/05/2006, Uncontrolled Copy, © BSI

— BS 7346-2:1990, Components for smoke and heat control systems —
Part 2: Specification for powered smoke and heat ventilators;
and based on this nominaltransition period of at least twenty-one months, subject to
review, BS 7346-2;1990 would be withdrawn in April 2003 at the earliest.
NOTE This date is approximate. Users of this standard should contact BSI Customer Services
for confirmation of withdrawal

The UK participation in its preparation was entrusted to Technical Committee FSH/25,
Smoke and heat control systems, which has theresponsibility to:
—

aid enquirers to understand the text;

—

present to the responsible European committee any enquiries on the
interpretation, or proposals for change, and keep the UK interests informed;

—

monitor related international and European developments and promulgate
them in the UK.

A list of organizations represented on this committee can be obtained on request to itssecretary.
Cross-references
The British Standards which implement international or European publications
referred to in this document may be found in the BSI Catalogue under the section
entitled “International Standards Correspondence Index”, or by using the “Search”
facility of the BSI Electronic Catalogue or of British Standards Online.
This publication does not purport to include all thenecessary provisions of a contract.
Users of this publication are responsible for their correct application
This British Standard, having
been prepared under the
direction of the Health and
Environment Sector Policy and
Strategy Committee, was
published under the authority
of the Standards Policy and
Strategy Committee on
31 May 2002

© BSI 31 May 2002

Compliance with a BritishStandard does not of itself confer immunity from
legal obligations.

Summary of pages
This document comprises a front cover, an inside front cover, the EN title page, pages 2
to 42, an inside back cover and a back cover.
The BSI copyright date displayed in this document indicates when the document was
last issued.

Amendments issued since publication
Amd. No.

ISBN 0 580 38228 1

Date...