Informe

SX-E Series Autoclaves

Model name | SX-300 | SX-500 | SX-700 |
Operating Temperature Range | Sterilizing | 105 ∼ 135°C（0.019 ∼ 0.212MPa） |
| Heating | 45 ∼ 104°C（0 ∼ 0.015MPa） |
| Warming| 45 ∼ 95°C |
Maximum operating pressure | 0.263MPa | 0.25MPa |
Temperature | Display | Digital |
Pressure Gauge | Display | Analog |
| Display range | 0 ∼ 0.4MPa |
Heat source | 1.5kWelectric heater | 2kW electric heater | 3kW electric heater |
Safety device | • Water level sensor, • GFCI, • Lid interlock, • Over-heat prevention, • Over-pressure prevention, • Open temperaturesensor detection, • Safety valve |
Time | Display | Digital |
| Display
Range | Sterilizing | 0:00 - 9:59, 0 - 99hours, 0 - 999min.(0:00 - 9:59,10 - 99hours changeable) |
| | Heating | |
|| Warming | Variable: 0 - 99hours |
Chamber dimensions | φ325 x 553mm | φ325 x 733mm | φ370 x 774mm |
Chamber capacity | Effective internal
volume:36L,
Internal volume:44L | Effective internalvolume:50L,
Internal volume:58L | Effective internal
volume:69L,
Internal volume:79L |
Chamber material | SUS304 |
Dimensions (mm) | 410W x 477D x 790Hmm
(With protruding:574D) | 410W x 477D x970Hmm
(With protruding:574D) | 470W x 528D x 1003Hmm
(With protruding:625D) |
Weight | 50kg | 60kg | 72kg |
Rated voltage | 120V AC | - |
| 230V AC |
Power input | 13A/120V | 17A/120V | -|
| 7A/230V | 9A/230V | 13A/230V |
Required power supply | Single-phase 120V AC
(50/60 Hz)15A or more | Single-phase 120V AC
(50/60 Hz)20A or more | - |
| Single-phase 230V AC
(50/60Hz)10A or more | Single-phase 230V AC
(50/60 Hz)15A or more | Single-phase 230V AC
(50/60 Hz)15 A or more |
Power consumption (calorific value) | 1.5kW (1290kcal/h) | 2.0kW (1720cal/h) | 3.0kW(2580cal/h) |
Environmental Conditions | When operating the autoclave, observe the environmental conditions given below.
Ambient temperature: 10 to 35°C
Atmospheric pressure: 860 to 1060hPa
Relative...