Ing. electronico

HC900 Hybrid Controller
Installation and User Guide
Doc. No.: Revision: Date: 51-52-25-107 11 10/06

Industrial Measurement and Control

Notices and Trademarks
Copyright 2006 by Honeywell Revision 11 October 2006

Warranty/Remedy
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warrantyinformation. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supplyis believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.

Industrial Measurement and Control Honeywell 1100 Virginia Drive Fort Washington, PA 19034Honeywell is a U.S. registered trademark of Honeywell Other brand or product names are trademarks of their respective owners.

ii

HC900 Hybrid Controller Installation and User Guide

Revision 11 10/06

About This Document
Abstract
This document provides descriptions and procedures for the installation, operation and maintenance of the HC900 Hybrid Controller hardware.

ReferencesThe following list identifies all documents that may be sources of reference for material discussed in this publication.
Document Title HC900 Hybrid Controller Technical Overview Specification HC900 Module Specification HC900 Controlware Specification Hybrid Control Designer Specification HC900 Hybrid Controller Operator Interface User Guide HC900 Hybrid Control Designer User Guide HC900 HybridControl Utilities User Guide HC900 Hybrid Controller Function Block Reference Guide HC900 Hybrid Controller Communications User Guide HC900 Controller Redundancy Overview & System Operation ID # 51-52-03-31 51-52-03-41 51-52-03-42 51-52-03-43 51-52-25-108 51-52-25-110 51-52-25-126 51-52-25-109 51-52-25-111 51-52-25-133

Contacts
World Wide Web The following lists Honeywell’s World Wide Web sitesthat will be of interest to our customers.
Honeywell Organization Corporate Industrial Measurement and Control Technical tips WWW Address (URL) http://www.honeywell.com http://www.honeywell.com/imc http://content.honeywell.com/ipc/faq

Telephone Contact us by telephone at the numbers listed below.
Organization United States and Canada Honeywell Phone Number 1-800-423-9883 1-800-525-7439 Tech.Support Service

Revision 11 10/06

HC900 Hybrid Controller Installation and User Guide

iii

Symbol Definitions
The following table lists those symbols that may be used in this document and on the product to denote certain conditions.
Symbol Definition

This DANGER symbol indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. ThisWARNING symbol indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. This CAUTION symbol may be present on Control Product instrumentation and literature. If present on a product, the user must consult the appropriate part of the accompanying product literature for more information. This CAUTION symbol indicates a potentially hazardoussituation, which, if not avoided, may result in property damage. WARNING
PERSONAL INJURY: Risk of electrical shock. This symbol warns the user of a potential shock hazard where HAZARDOUS LIVE voltages greater than 30 Vrms, 42.4 Vpeak, or 60 Vdc may be accessible. Failure to comply with these instructions could result in death or serious injury. ATTENTION, Electrostatic Discharge (ESD) hazards. Observe...