Ingeniero Civil

civil1Port+USB Router
USER’S Manual
AN1020-15Z

Important Safety Instructions
Please read these instructions carefully:
1.

Unplug the ADSL Modem Ethernet Adaptor from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.

2.

Do not use the ADSL Modem Ethernet Adaptor near water.

3.

Make sure the working platform isflat. Do not put heavy objects on the
ADSL Modem.

4.

Use the AC/DC power adapter that matches the ADSL Modem.

5.

Disconnect the power supply and all wires from the ADSL Modem in
lightning storm, to avoid lightning strike.

6.

Take water proof measures during the storage, transportation and running
of the ADSL Modem.

7.

Avoid direct sunlight.

Note: When the ADSL Modem isused for a long time, temperature of the
shell will rise. This is normal.

Chapter 1:

Introduction

ADSL modem is the ADSL user-end equipment (ATUR) to with Ethernet
interface, complies with variety ADSL standard, and excellent interoperation.

Feature
Full rate with ADSL router, support Bridge/Router
Up to 24Mbps downstream and up to 1Mbps upstream data rate
Maximum transmissionrange: 5.4 Kilometers
Friendly GUI for web configuration, complies with the popular
Server/Browser mode
Complies with full rate ADSL standard:
ANSL T1.413 ISSUE 2
ITU G.992.1 (G.dmt) Annex A
ITU G.992.2 (G.lite)
ITU G.992.3(ADSL2)
ITU G.992.5(ADSL2+)

Encapsulation Supports
RFC 1483 bridge
RFC 1483 Router
Classical IP over ATM (RFC 1577)
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC2516)

System requirement
Recommended system requirements are:
1

Pentium 233MHZ or above
Memory: 64MB or above
10M Base-T Ethernet or above
WIN9X WIN2000 WINXP WINME WINNT
Ethernet Network Interface Card
Please collect the following information from your ADSL service provider.
This information will be very helpful for your ADSL configuration. To keep a
record for reference, you canfill in the column as below:
VPI
VCI
Encapsulation: VCMUX or LLC
Protocol
Standard
User name
Password
Password protocol

LED indicator
Indicator

Status

Power

ON

Power supply is on

Link

ON

Have connected to CO
physical floor

Slow Blink

Be trying to connect to
physical link

2

Description

Be handing with CO
physical link

Quick Blink
Data

Bereceiving
sending data

Blink
ON

Ethernet

and

Have linked to HUB
Be transmitting data to
HUB

Blink

Rear pane Layout

Interface
Switch
Power socket

Function
Power on/off
Plug in for power

RESET

Modem Reset button
Press and hold around 5~8s to reset the
hardware. The modem will automatically
restart. This action will recover the
modem’s default configuration.LAN

Plug in for RJ45, Can connect to HUB or
computer

USB

Connect to USB HUB or computer USB
port

LINE

Connect to ADSL telephone line interface

3

Chapter 2:

Hardware Installation

Connect your ADSL modem to computer as the following image:
If connecting to the splitter, following the below:
If connecting to the splitter, connect the “Line” splitter to wall jackusing one telephone cable
Use the other telephone cable to connect modem port of the splitter
and “LINE” port of the modem. The “phone” port of the splitter can
be use to connect the telephone and the splitter by a telephone cable.
Use LAN cable to connect “Ethernet” port of the modem and “LAN”
port of your computer.

Dc

If do not need to connect to the splitter,
Connect the modem to walljack using one telephone cable
Use LAN cable to connect “Ethernet” port of the modem and “LAN”
port of your computer

4

Chapter 3:

Modem parameter setting

Set computer network card IP address
Fix network card and set network card IP Address.
Set IPaddress into same as network-band (For example: modem IP address:
192.168.1.1 computer network card IP address: 192.168.1.X, X is...