Ingeniero

6-PIN DIP ZERO-CROSS OPTOISOLATORS TRIAC DRIVER OUTPUT
(250/400 VOLT PEAK)
MOC3031M DESCRIPTION
The MOC303XM and MOC304XM devices consist of a AlGaAs infrared emitting diode optically coupled to a monolithic silicon detector performing the function of a zero voltage crossing bilateral triac driver. They are designed for use with a triac in the interface of logic systems to equipment poweredfrom 115 VAC lines, such as teletypewriters, CRTs, solid-state relays, industrial controls, printers, motors, solenoids and consumer appliances, etc.
6 6 1 1

MOC3032M

MOC3033M

MOC3041M

MOC3042M

MOC3043M

FEATURES
• • • • Simplifies logic control of 115 VAC power Zero voltage crossing dv/dt of 2000 V/µs typical, 1000 V/µs guaranteed VDE recognized (File # 94766) -ordering option V(e.g., MOC3043VM)

6

SCHEMATIC
1

ANODE 1

6 MAIN TERM.

CATHODE 2

5 NC* ZERO CROSSING CIRCUIT

APPLICATIONS
• • • • Solenoid/valve controls Static power switches Temperature controls AC motor starters • • • • Lighting controls AC motor drives E.M. contactors Solid state relays

N/C 3

4 MAIN TERM.

*DO NOT CONNECT (TRIAC SUBSTRATE)

ABSOLUTE MAXIMUM RATINGS (TA = 25°Cunless otherwise noted)
Parameters TOTAL DEVICE Storage Temperature Operating Temperature Lead Solder Temperature Junction Temperature Range Isolation Surge Voltage(1) (peak AC voltage, 60Hz, 1 sec duration) Total Device Power Dissipation @ 25°C Derate above 25°C EMITTER Continuous Forward Current Reverse Voltage Total Power Dissipation 25°C Ambient Derate above 25°C DETECTOR Off-State OutputTerminal Voltage Peak Repetitive Surge Current (PW = 100 µs, 120 pps) Total Power Dissipation @ 25°C Ambient Derate above 25°C VDRM ITSM PD Symbol TSTG TOPR TSOL TJ VISO PD IF VR PD Device All All All All All All All All All MOC3031M/2M/3M MOC3041M/2M/3M All All All Value -40 to +150 -40 to +85 260 for 10 sec -40 to +100 7500 250 2.94 60 6 120 1.41 250 400 1 150 1.76 Units °C °C °C °C Vac(pk) mW mW/°CmA V mW mW/°C V A mW mW/°C

Note 1. Isolation surge voltage, VISO, is an internal device dielectric breakdown rating. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.

 2001 Fairchild Semiconductor Corporation DS300256 8/06/01

1 OF 9

www.fairchildsemi.com

6-PIN DIP ZERO-CROSS OPTOISOLATORS TRIAC DRIVER OUTPUT
(250/400 VOLT PEAK)
MOC3031M MOC3032M MOC3033MMOC3041M MOC3042M MOC3043M

ELECTRICAL CHARACTERISTICS

(TA = 25°C Unless otherwise specified)

INDIVIDUAL COMPONENT CHARACTERISTICS
Parameters EMITTER Input Forward Voltage Reverse Leakage Current DETECTOR Peak Blocking Current,Either Direction IF = 30 mA VR = 6 V Rated VDRM, IF = 0 (note 1) VF IR IDRM1 VTM dv/dt All All All All All 1.8 1000 1.25 0.01 1.5 100 100 3 V µA nA V V/µs TestConditions Symbol Device Min Typ Max Units

Peak On-State Voltage,Either Direction ITM = 100 mA peak, IF = 0 Critical Rate of Rise of Off-State Voltage IF = 0 (figure 9, note 3)

TRANSFER CHARACTERISTICS
DC Characteristics LED Trigger Current Holding Current, Either Direction

(TA = 25°C Unless otherwise specified.) Symbol IFT IH Device MOC3031M/MOC3041M MOC3032M/MOC3042M MOC3033M/MOC3043M All400 Min Typ Max 15 10 5 µA mA Units

Test Conditions Main terminal voltage = 3V (note 2)

ZERO CROSSING CHARACTERISTICS
Characteristics Inhibit Voltage Leakage in Inhibited State Test Conditions

(TA = 25°C Unless otherwise specified.) Symbol VIH IDRM2 Device All All Min Typ Max 20 500 Units V µA

IF = rated IFT, MT1-MT2 voltage above which device will not trigger off-state IF = rated IF,rated VDRM, off-state

Note 1. Test voltage must be applied within dv/dt rating. 2. All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating IF lies between max IFT (15 mA for MOC3031M & MOC3041M, 10 mA for MOC3032M & MOC3042M, 5 mA for MOC3033M & MOC3043M) and absolute max IF (60 mA). 3. This is static dv/dt. See Figure 9 for test...