ley trabajo

English

6. SELECTING AND ADJUSTING THE RINGTONE

1. SETUP
l

TEMPORIS 200
TM

Plug one end of the spiral cord into the handset at (A), and the other end into the socket
on the left side of the phone (B).

You have a choice of four ringtones. You can adjust the volume when the phone
rings or by going into programming mode.
6.1 WHEN A CALL COMES IN
You can change the ringtone asthe phone is ringing.
l Press 1, 2, 3 or 4 to select a ringtone.
Your modifications are memorized, and you can answer the call.
6.2 IN PROGRAMMING MODE

A

B

l

To go into programming mode:
l

BEEP
C

Pick up the handset.

l

E

Press and hold keys 1 and 3 simultaneously.

l

Plug the telephone cord into the socket (C) on the back of the set and into the wall socket (D).Release the keys.

l

Access to programming mode is confirmed by 1 beep.

To adjust the ringtone:

D

l

Press the Programming key then key 1 (current melody is heard).

l

NOTE: The spare socket (E) enables a modem to be connected.
l Affix the emergency number label in the appropriate place.

To change the ringtone, press a key from 1 to 4.

To adjust the ringing volume:2. WALL MOUNTING

l

Selet the ringing volume switch: low / mid / high.

To mount your telephone set on the wall, remove the wall mounting peg and put it back
the other way round as shown below. Drill two 6 mm holes, spaced 70 mm apart. Fit two
wall plugs, then insert two screws (3.5 mm Ø and 25 mm long), but without tightening
them.

12. PRECAUTIONS OF USE / TECHNICAL SPECIFICATIONSAppliance designed for connection to a TNV3-class analogue telephone line as defined
in European safety standard EN60950-1.

l

l

7. LOCKING THE TELEPHONE

For each of the 3 operations, you need to go into programming mode first.
l Press and hold keys 4 and 6 simultaneously.
l Pick up the handset.
l Release the keys.

Horizontal position

7.2 LOCK / UNLOCK

FUNCTION KEYS

lPress the Programming key followed by 1.

Lock
Press the
key.
l Replace the handset.
l

Peg for wall mounting
Affx emergency number label here

Unlock
Press the
key.
Enter the password.
l Replace the handset.
l

10 Memory Key

Additional services
access key

BEEP
BEEP

3.1 RINGER LAMP / MESSAGE WAITING LAMP
This light flashes in time with the ringer when you receivea call. It goes out as
soon as you take the line.
If you are connected to an ALCATEL PABX with a voicemail service, the message waiting lamp tells you there is a message in your mailbox.
3.2 HANDSET VOLUME CONTROL
Press the

key.

l

To return to the initial volume, press the

key.

The Mute key puts your correspondent on hold so that you can talk to someone else without the firstperson hearing.

l

BEEP

1 beep is emitted on the line every 10 seconds.
To resume the conversation, press the Mute key again.

l

l

Press the Redial key.

Press the Redial key.

Connection
Plug the RJ9 headset cord into the socket on the base of the telephone.

Headset socket

Utilisation
To use the headset, once you have plugged it in:
Slide the selector switch to headsetmode (
Pick up the handset.
l Dial the number.

).

l

" You can now use the telephone in the normal way.

SAS Capital 130 037 460 € - 390 546 059 RCS Nanterre
Servicios comerciales y de marketing en España:
c/Manuel Tovar, 49-53 28034 Madrid

Switch

5. USING THE MEMORIES
NOTE: In programming mode, your TEMPORIS communicates with you by emitting a number of beeps.
1 beep :every key press is acknowledged by a beep.
2 beeps : programming correct.
3 beeps : programming error. Start again from the beginning.

Ajuste del volumen del
microteléfono

Your telephone set can store 10 numbers of up to 24 digits.
5.1 PROGRAMMING THE MEMORIES
Programming without calling
l Pick up the handset.
l Press the Programming key.
l Enter the number.
l Press one of the ten...