Manual acewe

Solo disponible en BuenasTareas
  • Páginas : 2 (373 palabras )
  • Descarga(s) : 0
  • Publicado : 26 de enero de 2012
Leer documento completo
Vista previa del texto
1. 2. 3. 4. 8. 5. 6. 7.

MODE BUTTON

1. Pressthe MODE buttonto move in loop sequence from one function screen to another will of meterandtrip meterautomatically 2. TheLCD screen convertto thescreen Speed during the riding, if the button operation is suspended for 10 seconds.
MODE

MODE

MODE

MODE

RESET BUTTON
1.Hold down the RESETbuttonfor 2 seconds the function'sscreen atdesireto be reset.The computerwill resetthe TRIP, RT or MAX data from stored values to zero 2. It cannot reset ODO and TT data

P

Left direction indicator/Green Main-beam headlamp/Blue Right directionindicator/Green Hazard Warning/ Red Parking/Green Direction indicator/Green

N Neutral Gear /Green R Reverse Gear /Red D Drive Gear/Green

Engine oil / Red

WHEEL CIRCUMFERENCE TABLE
1.Thefollowing table is calculated by the formula of Tire Diameter (inch) x 25.4(mm/inch) x 3.1416 = wheel circumference (in mm). differenttire sizeandkey in 2. Identifythetire sizeof your ATV whenyou needtochange the corresponding number shown in the following chart.
Tire Size 15 inch 16 inch 17 inch 18 inch Circumference number (mm) 1197mm 1277mm 1357mm 1436mm Tire Size 19 inch 20 inch 21 inch 22 inchCircumference number (mm) 1516mm 1596mm 1676mm 1756mm Tire Size 23 inch 24 inch 25 inch 26 inch Circumference number (mm) 1835mm 1915mm 1995mm 2075mm

Engine coolant temperature/ Red

UNIT &WHEEL CIRCUMFERENCE SETTING
1. Pushandhold bothMODE & RESETbuttons 2 seconds for to go into the unit- setting screen. MAX AVG TRIP ODO RT TT

RESET MODE (2 SEC)

+

RESET

2. It displays KM/h orM/h. Each press of the RESET button converts the unit. 3. Pressthe MODE button to confirm the unit and go into the wheel circumference setting screen. 4. It displays cXXX, the "c" means Circumference,it follows 4 digits are the circumference your original tire size, a flashing digit is the digit to e set. the the 5. Eachpress RESETkey to addthe digit by 1, press Modekey to confirmthe setting...
tracking img