Manual Kdc

Kroy Limited Warranty
Kroy LLC warrants its labeling system equipment against defects in
material and workmanship for a period of six (6) months from the date of
original purchase. At no charge to the customer, except for inbound
freight to Kroy's servie center, Kroy will, at Kroy's option, repair or
replace any product dtermined to be defective. Kroy will pay return UPS
ground charges. Apurchase receipt or other evidence of purchase will
be required before warranty service is rendered. This warranty does not
cover cosmetic damage or any damage caused by accident, misse,
abuse, negligence or modification or attempted repair by anyone other
than Kroy or a Kroy authorized repair agent. THERE ARE NO EXPRESS
WARRANTIES EXCEPT AS SET FORTH IN THIS PARAGRAPH.
KROY SHALL NOT BELIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. ALL EXPRESS AND
IMPLIED WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET
FORTH ABOVE.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, orlimitaitons on how long an implied warranty
lasts, so the above exclusions or limitations may not apply to you. This
warranty gives you specific legal rights, and you may have other rights
which vary from state to state.If a problem develops with your Kroy
labeling system during or after this warranty period, you may contact
your Kroy dealer or Kroy's service center.

Your Guarantee
Every Kroyproduct is backed by the Kroy name, our innovative
leadership and our long-standing commitment to qualtiy.

Your Guarantee

i

FCC Notice
This equipment generates and uses radio frequency energy and, if not
installed and used in strict accordance with these instructions, may
cause interference to radio and television reception. It has been tested
and found to comply with the limits for aClass B computing device
pursuant to Subpart J of Part 15 of the FCC Rules, which are designed
to provide reasonable protection against such interference in a
residential installation. However, there is no guarantee that interference
to radio or television reception, which can be determined by turning the
equipment off and on, will not occur. The user is encouraged to try to
correct theinterference by using one or more of the following measures:
•
•
•
•

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Connect the equipment to an outlet on a branch circuit
different than the branch the receiver is connected to.
Consult the dealer or an experienced radio/television
technician for help.

Note: To comply with FCCregulations, use only Kroy's recommended
serial cable when connecting the printer to a host computer (Kroy Part
Number 2506600). When installing the cable, the EMI filter should be
located 2-3" from the printer.

CDC Notice
This digital apparatus does not exceed Class B limits for radio noise for
digital devices as set out in the radio interference regulations of the
Canadian Department ofCommunications.
Le présent appareil numérique n’émet pas du bruits radioélectriques
dépassant les limites applicable aux appareils numériques de Classe B
prescrites dans le réglement sur le brouillage radioélectrique édicté par
le Ministére des Communications du Canada.

ii

CDC Notice

System Specifications
Input Device:

57 Key - Alpha-numeric elastomer keypad

Character Size:6 point to 72 point, 1 inch supply
6 point to 55 point, .8 inch supply
scalable in 1 point increments

Print Tape:

.5 inch (13 mm)
.8 inch (19 mm)
1 inch (24.5 mm)

LCD Display:

2 lines, 16 characters 5x7 dot matrix

Power Requirements:

7.5 - 9 VDC, 4A (Universal Power Adapter or
6 - C-size nickel-cadmium batteries)

Weight:

4 lbs 2 oz with batteries
3 lbs 2 oz without...