Me Quiero Suscribir, Solo Eso
Páginas: 2 (385 palabras)
Publicado: 29 de junio de 2012
VSL-Intrafor Hong Kong
Ref. No.:
QSEA-2012-01
Quality Safety Environment Sustainable Development ALERT
Date: 28-MAY-2012
Page 1 of 1
Please distribute to all workplaces
Headline: AlertScope: Alert Type: Issue Date: Location: MINOR ACCIDENT – Improper Working Cloths
Quality
Health & Safety
Issued By: Activity:
Environment
Sustainable Development
Best Practice [Goodideas] 17 May 2012 Tseung Kwan O Transfer Plate Project- Hong Kong
Hazard or Risk [Anything that could cause injury, damage or loss]
Accident or Incident [An actual VSL-Intrafor accident orincident]
Christopher Chan Hydraulic Jack Installation
What happened?
The injured worker (IP) was assigned to install ZPE-460 jack for tendon stressing. His lower leg was slashed by the strand. Aminor wound and bleeding was caused and no other symptom was found after treatments. During the accident, IP was setting a hydraulic jack (435kg) with 2 co-workers. The stressing tendon was located inheight of 1.2m from the working platform in which the width of platform was 2m. When IP closed to the tendon to carry out the setting works, the spared strands of adjacent tendon slashed his rightlower leg.
Findings:1. 2. The worker (IP) was wared a shorts (not uniform) when the accident happened. The adjacent side (almost 800mm apart) of the stressing tendon have another tendon was readiedfor the following stressing procedures, i.e. anchor head was installed and the wrapping sheet of strands were removed.
Remedial Action, Preventive Action & Improvements:
• •
Recommend to wear theCompany’s uniform in which the trouser shall be wear for site works. Wrappings of strands after threading shall not be removed before stressing. Especially for the distance between tendons are close.Working platform shall be kept neat and tidy at all the time.
•
Feedback:
Similar Cases:
[Enter brief details of any similar incident or events that you are aware of]
Action Taken:...
Ref. No.:
QSEA-2012-01
Quality Safety Environment Sustainable Development ALERT
Date: 28-MAY-2012
Page 1 of 1
Please distribute to all workplaces
Headline: AlertScope: Alert Type: Issue Date: Location: MINOR ACCIDENT – Improper Working Cloths
Quality
Health & Safety
Issued By: Activity:
Environment
Sustainable Development
Best Practice [Goodideas] 17 May 2012 Tseung Kwan O Transfer Plate Project- Hong Kong
Hazard or Risk [Anything that could cause injury, damage or loss]
Accident or Incident [An actual VSL-Intrafor accident orincident]
Christopher Chan Hydraulic Jack Installation
What happened?
The injured worker (IP) was assigned to install ZPE-460 jack for tendon stressing. His lower leg was slashed by the strand. Aminor wound and bleeding was caused and no other symptom was found after treatments. During the accident, IP was setting a hydraulic jack (435kg) with 2 co-workers. The stressing tendon was located inheight of 1.2m from the working platform in which the width of platform was 2m. When IP closed to the tendon to carry out the setting works, the spared strands of adjacent tendon slashed his rightlower leg.
Findings:1. 2. The worker (IP) was wared a shorts (not uniform) when the accident happened. The adjacent side (almost 800mm apart) of the stressing tendon have another tendon was readiedfor the following stressing procedures, i.e. anchor head was installed and the wrapping sheet of strands were removed.
Remedial Action, Preventive Action & Improvements:
• •
Recommend to wear theCompany’s uniform in which the trouser shall be wear for site works. Wrappings of strands after threading shall not be removed before stressing. Especially for the distance between tendons are close.Working platform shall be kept neat and tidy at all the time.
•
Feedback:
Similar Cases:
[Enter brief details of any similar incident or events that you are aware of]
Action Taken:...
Leer documento completo
Regístrate para leer el documento completo.