Podemos ser lider...

!!! FILE EXTRACTION IS COMPLETE !!!
PRO2KXP.EXE
This file, Relnotes.rtf, is stored in the root of the archive extraction.

Requirements
Installation/Upgrade of Drivers
Troubleshooting Installation
PROSet
Available Downloads( OSs, User Guides, Additional Features)
Known Issues
Disclaimer

Requirements
The PRO2KXPM(minimum) should only be used toupdate systems without PROSet installed. If PROSet is currently installed on the system, it must be updated with the full PRO2KXP.exe pack.
For Windows* 2000 the driver install requires SP3. Windows*XP has no special requirements.
Intel suggests you use the latest Service Pack available for your OS.

Installation/Upgrade of Drivers Contains the Following Sections (Choose 1)
ImmediateInstallation/Upgrade of Drivers on Local Machine
Install or Update Later
Creating driver Installation Diskettes
Manual Methods

Immediate Installation/Upgrade of Drivers on Local Machine
To install or update on this machine now, click ‘Install Now’ below or use standard OS installation methods

To Install or Update Later:
1. Click Start, Run and then browse to the directory where youextracted this archive.
2. Double click Setup.exe and click OK. Follow the on-screen instructions to complete the install.
3. Right Click on “My Network Places, Choose properties and finish configuring your network.

Creating driver Installation Diskettes
A batch file is supplied with this archive that will copy the minimum set of files (no PROSet) needed to install Intel PRO adapters. You willneed blank 1.44 diskettes. To access from command line, select Start, Run, and then enter \makedisk\make2KXP.bat and follow the prompts.

Manual installation:
1. Click the My Computer and choose Properties, From Hardware tab, choose Device Manager.
2. Right click on Network Adapters and choose scan for hardware changes.
3. The Plug and Play Wizard should pop up. Follow instructions but don’tselect an Intel adapter from the list. Click on Have Disk.
4. Enter the path to the directory where you extracted this archive and click OK. Then follow the instructions to install the drivers. When the adapter is added, it appears in the Network adapters list.
5. Click OK and then Close. If prompted, restart Windows.

Optional Manual Update
1. Click the My Computer and choose Properties, FromHardware tab, choose Device Manager.
2. Right click on the adapter you wish to update under Network Adapters and choose Properties.
3. From the Driver Tab of the pop up, click the Update button.
4. Enter the path to the directory where you extracted this archive and click OK.
5. Follow the on-screen instructions to update the drivers.

NOTE: If you are installing a driver in a computerwith existing Intel adapters, be sure to update all adapters with the same new software. This will ensure that all adapters will function correctly.

Troubleshooting
-Make sure that you use the drivers from this archive.

- When updating base drivers, if PROSet was installed, PROSet needs to be updated also. If you have downloaded the minimum Web Pak, you will need to download the full Web Pakto obtain the updated PROSet files before being able to access the PROSet application.

-In your computer’s BIOS settings, make sure "Plug and Play OS" is set to YES.

-Make sure the driver is loaded and the protocols are bound.

-Check the Windows* Event Viewer for error messages.

-If you are attaching to a NetWare* network, check your frame type and verify that NetWare client or serversoftware has been installed.

-Test the adapter with the Intel PROSet advanced configuration utility or with the DOS diagnostic provided in the Tools Directory contained in this archive.

-Check with your LAN administrator - you may need to install supplemental networking software.

Intel(R) PROSet
To start Intel PROSet , double-click the Intel PROSet icon found either in the lower...