Proyecto De Servicio

Instruction
Manual

Models UM350/UM330
Digital Indicator with Alarms
User’s Manual
IM 05F01D02-41E

IM 05F01D02-41E
1st Edition

Blank Page

i



Introduction
Thank you for purchasing the UM350/UM330 digital indicator with alarms.

I How to Use the Manuals
Purpose

Title

Setup

1. Installation

Basic operation

Description

2. Initial SettingsOperating
procedures
and troubleshooting

Describes the tasks (installation, wiring, and others) required
to make the indicator ready for operations.

Describes examples of setting PV input types, and alarm
types. Making settings described herein allows you to carry
out basic monitoring.
3. Operations
Describes examples of setting alarm setpoints, as well as
4.1 Troubleshooting keyoperation necessary to run the indicator.

Brief operation
5. Parameters
and setpoint recording

Contains the parameter map used as a guideline for setting
parameters and lists of parameters for recording user settings.

I Regarding This User’s Manual
(1) This manual should be provided to the end user. Keep an extra copy or copies of the
manual in a safe place.
(2) Read thismanual carefully to gain a thorough understanding of how to operate this
product before starting operation.
(3) This manual describes the functions of this product. Yokogawa M&C Corporation
(hereinafter simply referred to as Yokogawa) does not guarantee the application of
these functions for any particular purpose.
(4) Under absolutely no circumstances may the contents of this manual, inpart or in
whole, be transcribed or copied without permission.
(5) The contents of this manual are subject to change without prior notice.
(6) Every effort has been made to ensure that the details of this manual are accurate.
However, should any errors be found or important information be omitted, please
contact your nearest Yokogawa representative or our sales office.

Media No. IM05F01D02-41E (CD)
1st Edition : May 2000 (YK)
All Rights Reserved Copyright © 2000, Yokogawa M&C Corporation

IM 05F01D02-41E

1st Edition : May 31,2000-00

ii



I Safety Precautions
The following symbol is indicated on the indicator to ensure safe use.

CAUTION

This symbol on the indicator indicates that the operator must refer to an explanation in the
user’s manual inorder to avoid the risk of injury or death of personnel or damage to the
instrument. The manual describes how the operator should exercise special care to avoid
electric shock or other dangers that may result in injury or loss of life.

The following symbols are used in the hardcopy user’s manuals.

NOTE
Indicates that operating the hardware or software in a particular manner maydamage it or
result in a system failure.

IMPORTANT
Draws attention to information that is essential for understanding the operation and/or
features of the indicator.

I Regarding Force Majeure
Yokogawa M&C Corporation assumes no liability for any loss or damage, direct or indirect,
caused by the use of or unpredictable defects of the product.

IM 05F01D02-41E

1st Edition : May31,2000-00

Toc-1



Models UM350/UM330
Digital Indicator with Alarms
User’s Manual
IM 05F01D02-41E 1st Edition

CONTENTS
1.

Installation .............................................................................................. 1-1
1.1
1.2

How to Install ................................................................................................... 1-2

1.3How to Connect Wires .................................................................................... 1-5

1.4

Hardware Specifications ................................................................................ 1-7

1.5

2.

Model and Suffix Codes .................................................................................. 1-1

Terminal Wiring Diagrams...