Regulacion

E2K-X15MF1 2M

Shield | Unshielded |
Cylinder type sensing head size | M30 |
Sensing method | Capacitive type |
Sensing distance | 15 mm -10% to +10% |Setting distance | 0 to 10 mm |
Differential distance | 4% to 20% of sensing distance |
Sensing object | Conductor and dielectrics |
Standard sensing object | Withgrounded metal 50*50*1mm |
Response frequency (Average) | DC: 100 Hz |
Power supply voltage | 12 to 24 VDC |
Operating voltage range | 10 to 30 VDC |
Current consumption| 15 mA Max. |
Control output (Output type) | PNP voltage-current output |
Control output (Switching capacity) | 0 to 200 mA |
Control output (Residual voltage) |(DC) 1 V Max. （under load current with cable length of 2m） |
Indicator | Detection indicator(red) |
Operation mode | NO |
Protective circuit | Surge suppressorPower supplyreverce polarity protection |
Standard or Different frequency | Standard |
Ambient temperature | Operating: -10 to 55 CELStorage: -10 to 55 CEL(with no icing or condensation) |Ambient humidity | Operating: 35 to 95 %RHStorage: 35 to 95 %RH(with no condensation) |
Temperature influence | +-20% Max. of sensing distance in temperature range of -10 to +55CEL(Asthe basis for sensing distance of 23CEL) |
Voltage influence | +-2% Max. of sensing distance in rated voltage range +-20%. (As the basis for sensing distance at standard power voltage)|
Insulation resistance | 50 M OHM Min. at 500VDC between charged parts and the case |
Dielectric strength | 1000 VAC 50/60 Hz for 1 minute between charged parts and the case |Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 500m/s2 for 3 times each in X, Y, and Z directions |...