Termometro

Wireless Thermometer Indoor Outdoor WT110 Instruction Manual
Introduction Congratulations on purchasing this compact 433MHz temperature station which displays time，indoor temperature and outdoor temperature readings。With four easy to use keys，this product is ideal for use in the home，office，hospital or entertainment etc. Key Operation There are four different function keys available: Mode, CH/+,˚C/˚F and Min/Max/-. Mode key (setting): 1. During the normal working mode, press and hold for the MODE key about 3 seconds to enter the Manual setting mode. It will show 12/24 hour time display, temperature unit (˚C/˚F) display, and manual time settings. Inventory of contents: 1． 2． 3． one indoor station one remote sensor Instruction Manual 2. During the normal working mode, short press MODE keyto toggle display different time display format: hh:mm:ss, hh:mm:weekdate. yy:mm:dd. CH + key (Channel, plus): During the normal working mode, press shortly to toggle between different channel readings if there is more than one channel of remote temperature sensor Function: 1． Indoor temperature 2. 3 4. 5. 6. 7. Outdoor temperature Min/Max record of temperature Switch from ˚C to ˚F fortemperature unit Quartz time, calendar date. Flip out desk stand or wall mount. low battery indicator(around 2.5v, receiver only) Min/Max key - (Min/Max temperature, minus): 1. Quick Setup Hint：Use good quality Alkaline batteries and avoid using rechargeable。 1. Have the indoor temperature station and remote temperature sensor 3 to 5 feet apart. 2. Place the batteries into the indoor temperature stationfirst. All LCD segment will be turned on for 4 seconds, then the Outdoor Reception Signal Icon displayed, indicating that receiver is trying to find the remote sensor. Then place the batteries into the remote temperature sensor, transmitter will send out a temperature reading value first, after this the red signal light will be turned on for 8 seconds. Within one minute, outdoor temperature data willbe displayed indicating that receiver has 2. 2. During the normal working mode, press shortly to display the minimum temperature recorded for indoor and outdoor temperature. Press again to show maximum recorded temperature. Press third time, it will switch back to current temperature. When Min or Max recorded temperature displayed, press and hold this key 3 seconds, the recorded Min and Maxtemperature data will be replaced by current indoor and outdoor temperature. Manual setting: 1. In normal display mode, press and hold the MODE key for about 3 seconds. The “12h” or “24h” digit will be flashing. Press +(CH) or –(MIN/MAX) key to set the desired hour display mode. Press MODE key again to confirm and go to the TEMPERATURE UNIT (˚C/˚F) SETTING The temperature unit digit of the time displaywill be C/˚ SETTING. flashing. Press +(CH) or –(MIN/MAX) key to set the desired temperature learned before. During manual time setting mode, short press to toggle the selection or increment the setting value. ˚C/˚F key (temperature unit): C/˚ During the normal working mode, press ˚C/˚F key once, the display unit will switch from ˚C to ˚F for temperature unit. Press same key again, will switchback to ˚C.

synchronized with the transmitter. After both indoor and outdoor temperatures are displayed for 15 minutes you can place your remote sensor outdoors and set your time. 3. If a key is pressed before the weather station receives the 3.

unit ˚C/˚F display mode. Press MODE key again to confirm and go to the DD/MM SETTING The SETTING. DD/MM digit of the time display will be flashing.Press +(CH) or –(MIN/MAX) key to set the desired day-month or month-day display mode. 4. Press MODE key again to confirm and go to the HOUR SETTING The hour SETTING: digit of the time display will be flashing. Press +(CH) or –(MIN/MAX) key to adjust the hour (Press and hold to allow fast advancing). Press MODE key to confirm and go to the MINUTE setting.

temperature signal, it will take

10...