Traccion bars

TRACTION BARS FOR FORD
Traction...Action® Lift Bars for Mustangs
BOX PACKAGED

Lakewood Traction...Action lift bars work with axle torque to lift and load the chassis. This forces the wheels downward “planting the tires”, transferring power to the pavement and eliminating wheel hop for improved traction and straight line launch. Traction...Action lift bars replace the stock lower control armsand feature relocated pivot points to lift the chassis. Engineered for easy bolt-on installation with no welding required! Legal for NHRA stock eliminator classes. These bars are manufactured from heavy-gauge square steel tubing to prevent flex or bending and have an attractive black powder-coated finish to resist corrosion. Polyurethane bushings are included for positive stability, improvedride, and greatly reduced road noise.
1979-98 Mustang (except independent rear suspension) 1999-03 Mustang (except independent rear suspension) 21900 21901 21900 & 20901

Traction Bars for Mustang

BOX PACKAGED

A newly re-designed traction bar to fit all 1979-95 Ford Mustangs including rear quad shock applications. Designed to increase traction by eliminating rear wheel hop, and engineeredwith an anti-dive bushing and loop system for improved braking and handling. Manufactured from quality square steel tubing and complete with snubber reinforcing plates for added chassis strength. “Adjustable Link” allows more precise snubber adjustment for preloading of chassis to give superior handling under various street or track conditions. No special tools or welding is required for installationand all necessary hardware is included.
Mustang Traction Bars 1979-95 Urethane Bushing Replacement Kit (2 per kit) Rubber Snubber Replacement Kit (2 per kit) Replacement Anti-Dive Loop 20161 20532 20533 20162

20161

Heavy-Duty Suspension Control Arms for Mustangs
BOX PACKAGED

20152

Specifically designed for Ford Mustangs, these Lakewood Heavy-Duty Rear Upper and Lower Control Armseliminate flex that is common with stock OE control arms, thus greatly increasing traction by eliminating wheel hop. The lower arms are manufactured from heavy gauge square steel tubing and the uppers utilize heavy gauge steel plate that is boxed formed and welded for additional strength. Polyurethane bushings replace the soft factory rubber bushings to provide positive stability. These Lakewoodheavy-duty rear suspension control arms are easily installed in the stock mounting location without any modifications required, and have a black powder coated finish for attractive appearance and corrosion resistance. Grease fittings are supplied for ease of lubrication.
1979 - 98 Lower Control Arms 1999 - 03 Lower Control Arms 1979 - 03 Upper Control Arms 20150 20151 20152 20150 & 20151

TractionBars for Leaf Springs

BOX PACKAGED

These rugged suspension bars are designed for leaf-spring suspensions. Use them for street or strip. Traction is greatly increased, wheel hop ends, and the rubber snubbers give you a better ride. Not recommended for use with air shocks.
1964-73 Ford w/large housing, 3" diameter axle tube 1964-73 Ford w/small housing, 2-3/4" diameter step down axle tube1970-77 Maverick
See page 20 for replacement snubbers or use Mr. Gasket #1608 snubbers.

21602 21604 21604

21602

See pages 18 & 19 for traction bar dimensions

13

LIFT BARS FOR FORD & GM

Lakewood Lift Bars

NEW!

21312

• These Bolt-on lift bars utilize the Torque on the axle to help lift the chassis. When this takes place the opposite force plants the tires for improvedtraction. • These lift bars will greatly improve your traction, eliminating wheel hop and improving your _ mile times • These Lakewood lift bars are black powder coated in appearance to resist stone chips, corrosion and rusting • The Lakewood lift bars are completely street legal and are NHRA approved for stock classes. 1964-1972 GM A-Body Cars: Chevelle, GTO, Cutlass, Skylark, G.S., 442 1978-1987...