Traduccion

[pic]

v

-----------------------
RS-200 the second generation recovery unit has reached a new level of speed and efficiency.



The RS200 unit has been updated and the technology of"pre-cooled in the tank" now recovers coolant even faster at temperatures up to 120 Fahrenheit degrees. The new configuration of the unit increases the efficiency of its operation and reduces recovery time."Pre-cooled in the tank" technology The secret of the speed of the RS-200 unit consists in the technology with pending patent of "pre-cooled in the tank", andautomatic system that is maintained in the recovery tank in cold conditions. During the steam recovery the RS-200 unit maintains a low temperature in the recovery tank. When the tank pressure reaches155 PSI, the steam is automatically extracted from the cooled tank and returned as a cold liquid. Cooling is achieved faster because the "Pre-cooled in the tank" maintains low temperatures in the tank.The "Pre-cooled in the tank" technology eliminates the need for ice, water or other external agents to accelerate recovery.



Most of the recovery units starts working fast and then slow down asthe pressure in the recovery tank increases. The problem is even worse in high ambient temperatures. The result is that achieving the high vacuum specified by EPA consumes a lot of time. Not so withthe unit RS-200.



The graph at right shows the speed of the RS-200 unit with "pre-cooled in the tank" comparing with others units. With the RS-200 the recovery times reduced dramaticeddramatically, saving money and time.



▪"Pre-cooled in the tank" technology. Creates deep vacuums’ without the usual problems encountered when the recovery tanks overheat.▪Versatility. The same machine retrieves a wide range of coolants at high and medium pressure, including CFC, HDFC, HFC, as well mixed coolant. ▪Simple...