Ttttttt

Rev. 05

Descrizione Manuale Istruzioni

Redatto/Gestito Ufficio Tecnico

Approvato Resp.Tecnico

Cod.Ident. C386N.M01.EN.05

Pagine 1/39

Data Em. 09/04/2008

INSTRUCTION MANUAL

DIGITAL CONCRETE REBOUND HAMMER
MANUAL CODE: C386N

DO NOT TRY TO OPERATE THE APPLIANCE BEFORE READING AND LEARNING THIS MANUAL IN ALL ITS PARTS

Rev. 05

Descrizione Manuale IstruzioniRedatto/Gestito Ufficio Tecnico

Approvato Resp.Tecnico

Cod.Ident. C386N.M01.EN.05

Pagine 2/39

Data Em. 09/04/2008

GENERAL INDEX
Chapter 1
1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13

GENERAL INFORMATION
Warnings WARNING and DANGER indications - SIGNS Aim of the Instructions Manual Modifications and enclosures of the Instructions Manual Constructor IdentificationMachine Identification Data EC Stamp Usage Functioning system of the instrument

Operators
Storage Transportation and Movement Packaging removal

Chapter 2
2.01 2.02 2.03 2.04

TECHNICAL CHARACTERISTICS
General machine description Technical specifications Dimension and weight Electrical supply

Rev. 05

Descrizione Manuale Istruzioni

Redatto/Gestito Ufficio Tecnico

ApprovatoResp.Tecnico

Cod.Ident. C386N.M01.EN.05

Pagine 3/39

Data Em. 09/04/2008

Chapter 3
3.01 3.02

GENERAL SAFETY NORMS
General norms Machine Safety devices and protection

Chapter 4
4.01 4.02

INSTALLATION INSTRUCTIONS
Location Electrical connection

Chapter 5
5.01 5.02 5.03 5.04 5.05 5.06 5.07 5.08 5.09 5.10

IN FUNCTION - USE
Selection and preparation of the test surfacesSwitching on the equipment Performing test TEST REPORT CONFIGURATION TEST DESCRIPTION CALIBRATION Switching off Batteries DATA TRANSFER SOFTWARE

Chapter 6
6.01 6.02

MAINTENANCE
Ordinary Maintenance Authorised maintenance centres

Rev. 05

Descrizione Manuale Istruzioni

Redatto/Gestito Ufficio Tecnico

Approvato Resp.Tecnico

Cod.Ident. C386N.M01.EN.05

Pagine 4/39

Data Em.09/04/2008

Chapter 7 Chapter 8 Chapter 9

SPARE PARTS INACTIVITY DECOMMISSIONING THE MACHINE

ENCLOSURE DRAWING AND EXPLODED VIEW

Rev. 05

Descrizione Manuale Istruzioni

Redatto/Gestito Ufficio Tecnico

Approvato Resp.Tecnico

Cod.Ident. C386N.M01.EN.05

Pagine 5/39

Data Em. 09/04/2008

Chapter 1 1.01

GENERAL INFORMATION

WARNINGS

The manufacturer does not acceptany responsibility for direct or indirect damage to people, things or animals and use of the appliance in different conditions from those foreseen. The manufacturer reserves the right to make changes to the documentary information or to the appliance without advance notice. Check the machine responds to the standards in force in the state in which it has been installed. All operations necessaryfor maintaining machine efficiency before and throughout use are the operator’s responsibility Carefully read the entire manual before operating the machine. It is vital to know the information and limitations contained in this manual for correct machine use by the operator. Interventions are only permitted if the operator is accordingly competent and trained. The operator must be knowledgeableabout machine operations and mechanisms. The purchaser must ensure that operators are trained and aware of all the information and clarifications in the supplied documentation. Even with such certainty the operator or user must be informed and therefore aware of potential risks when operating the machine. Safety, reliability and optimum performance is guaranteed when using original parts. Anytampering or modifying of the appliance (electrical, mechanical or other) which has not been previously authorised in writing by the manufacturer is considered abusive and disclaims the constructor from any responsibility for any resulting damage. All necessary operations to maintain the efficiency of the machine before and throughout use are the responsibility of the user

Rev. 05

Descrizione...