Xd La Religion En El Siglo Xxi
Addressing Table
|Device |Interface |IP Address |Subnet Mask |
|HQ |Loopback0 |192.168.4.1 |255.255.255.0 |
| |Loopback1|192.168.5.1 |255.255.255.0 |
| |Loopback2 |192.168.6.1 |255.255.255.0 |
| |Serial0/0/0 |10.10.10.253 |255.255.255.252|
| |Serial0/0/1 |172.16.100.1 |255.255.255.252 |
|BRANCH1 |Loopback0 |192.168.1.1 |255.255.255.0 |
| |Loopback1 |192.168.2.1 |255.255.255.0|
| |Loopback2 |192.168.3.1 |255.255.255.0 |
| |Serial0/0 |10.10.10.254 |255.255.255.252 |
|BRANCH2|Loopback0 |192.168.7.1 |255.255.255.0 |
| |Loopback1 |192.168.8.1 |255.255.255.0 |
| |Loopback2 |192.168.9.1 |255.255.255.0|
| |Serial0/0/1 |172.16.100.2 |255.255.255.252[pic] |
Learning Objectives
Upon completion of this lab, you will be able to:
• Interpret router outputs.
• Identify the IP addresses for each router.
• Draw a diagram of the network topology.
• Cableand configure a network based on the topology diagram.
• Test and verify full connectivity.
• Reflect upon and document the network implementation.
Scenario
In this lab activity, you must recreate a network based only on the outputs from the show ip route command. Match the addresses to the corresponding interfaces and enter the information in the above address table. Configure therouters and verify connectivity. When complete, the outputs from the show ip route must be exactly the same as the supplied outputs. The show ip route command displays the current state of the routing table.
Task 1: Examine the router outputs.
Step 1: Examine the output from the HQ router.
HQ#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B –BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E – EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o – ODR
P - periodic downloadedstatic route
Gateway of last resort is not set
10.0.0.0/30 is subnetted, 1 subnets
C 10.10.10.252 is directly connected, Serial0/0/0
172.16.0.0/30 is subnetted, 1 subnets
C 172.16.100.0 is directly connected, Serial0/0/1
R 192.168.1.0/24 [120/1] via 10.10.10.254, 00:00:03, Serial0/0/0
R 192.168.2.0/24 [120/1] via 10.10.10.254, 00:00:03, Serial0/0/0
R...
Regístrate para leer el documento completo.