Ensayo para validación de modelos constitutivos de elastómeros de aislamiento sísmico
R. F. Kulak, and T. H. Hughes Reactor Engineering Division Argonne National Laboratory Argonne, IllinoisANL/CP--75640 DE92 013051 , , .,, . :,,
I The submitted
manuscript
has been authored
I bY a contractor of the U,S, Government under contract No, W.31.109-ENG'38. Accordingly, the U, S.Government retains a [ nonaxclusive, royalty-free license to publish | or reproduce the published form of this / contribution, or allow others purposes. to do so, for U, S, Government
DISCLAIMER
Thisreport was prepared as an account of work sponsoredby an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes anywarranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents thatits use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarilyconstitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state orreflect those of the United States Government or any agency thereof.
/
DISTRIBUTION OF THIS DOCUIvIENF IS UNLIMITED
_,A,I ..... ,
_v._ ->'
ABSTRACT ,),JY ,.,1_/_.' . ' ' ' High damping 'la,rnmat'ea e 1 t_ as omenc b earmgs are becoming the preferred device for'ilsot_ting large buildings and structures, such as nuclear power plants. The key component of these bearings is a fillednatural rubber elastomer. This material exhibits nonlinear behavior within the normal design range. The material damping cannot be classified as either viscous or hysteritic, but it seems to fall...
Regístrate para leer el documento completo.