Mantenimiento de microscopio olympus cx21

Maintenance Manual for maintenance engineer

CX21

Thank you for purchasing the Olympus microscope CX21. In order to fully utilize its performance and secure optimum condition, please read this manual before maintenance work. Please also keep it at hand during maintenance as well as for future reference. All rights reserved, Reproduction in whole or in part without written permissionis prohibited.

CX21 MAINTENANCE MANUAL

INTRODUCTION
The purpose of this manual is to satisfy any requirements for maintenance material that maybe considered as necessary to professionals in the maintenance field, such as Maintenance engineer in Hospitals. It is intended to be used as a tool for performing basic maintenance procedures if needed or when required as per the recommendedmaintenance schedule. The sections from this manual only cover procedure pertaining maintenance ’s that are considered to be easily performed. For more involved maintenance’s or repairs, it is recommended that you contact a qualified service engineer from your local Authorized Olympus dealer. Maintenance parts, grease, and other items specified in the manual can be ordered from yourAuthorized Olympus dealer, and subject to change without notice. The recommended maintenance schedule is shown below as reference. ( * Necessary item)
Portion Optical components 1) Outer surface Eyepiece, objective, condenser lens, filter, Cleaning * Optical/mechanical check Maintenance schedule Once in a year (If dirt is conspicuous or oil immersion objective is used, cleaning should be madeafter every use.) Once in a year Once in a year (If dirt is conspicuous, cleaning should be made after every use.) Once in a year

2) Inner part Prism, internal lenses Appearance Microscope frame, mechanical part Observation tube

* *

* Optical adjustment: 1) Optical axis (standard) 2) Left/right optical axis 3) Revolving axis 4) Parfocality * Mechanical movement: Grease replacementMechanical adjustment

Mechanical part Focusing unit, stage, revolving nosepiece, aperture iris diaphragm

Once in two to three years

CX21 MAINTENANCE MANUAL

CONTENTS

CHAPTER 1 MAINTENANCE PROCEDURE ........................................................................ 1
1. Maintenance ofMicroscope............................................................................................ 1 2. Guide to Maintenance .................................................................................................... 2 2-1 Overview of maintenance....................................................................................... 2 2-2 Cleaning method for the optical components.......................................................... 3 3. Preparing forInspection ................................................................................................. 6 4. CX21 Inspection Sheet................................................................................................... 7

CHAPTER 2 INSPECTION PROCEDURE............................................................................. 8
1. Checking Performance ofMicroscope............................................................................ 8 2. Checking Dirty Portion.................................................................................................... 8 2-1 Image influence caused by dirt on each component ............................................... 8 2-2 How to find dirty portion throughobservation.......................................................... 9 2-3 How to check cleaning condition .......................................................................... 10

CHAPTER 3 REPAIR PROCEDURE.....................................................................................11
1. Optical Adjustment ........................................................................................................11 2. Mechanical...