Manual Gdc
Páginas: 4 (856 palabras)
Publicado: 18 de julio de 2012
December 30, 2010
System recovery on the GDC server
Introduction
This document introduces a new system recovery feature for GDC servers. This feature can be enabled with a software update fromGDC support. This system recovery feature can be used to recover from the following errors: • • Corrupted OS filesystem requiring filesystem checking Errors in the OS partition which requiresre-installing OS files
Accessing the recovery system
The system recovery feature is contained in a separate boot image on the GDC server. Users will have to attach a keyboard to the GDC server beforepowering on the server, and interrupt the normal boot sequence to boot into the recovery system. The recovery system is designed to be used with a keyboard attached to the server. Note: Normal serveroperation cannot be carried out while the server is booted into the recovery system.
To exit from the recovery system, select ‘Reboot’ from the recovery system’s main menu (See Figure 2).
GDCTechnology Ltd.
Page 1 of 6
December 30, 2010
Booting into the recovery system
Follow the steps below to boot into the recovery system: 1. Attach a USB keyboard to the GDC server, using either theUSB ports on the front or rear panels. 2. Press the ‘Esc’ key during system boot to access the boot menu. 3. Select the ‘Rescue’ entry and press the ‘Enter’ key to boot into the recovery system (SeeFigure 1). 4. After the recovery system boots, the menu for the recovery system is displayed (See Figure 2).
Figure 1 GDC server boot menu
Figure 2 Main menu for recovery system
GDCTechnology Ltd.
Page 2 of 6
December 30, 2010
System recovery features
All features for the recovery system can be accessed through the main menu shown in Figure 2. Users can perform the followingactions while the recovery system is active: • • • • Create a system restore image Restore the system from a system restore image Manage system restore images Perform filesystem repair on an existing...
System recovery on the GDC server
Introduction
This document introduces a new system recovery feature for GDC servers. This feature can be enabled with a software update fromGDC support. This system recovery feature can be used to recover from the following errors: • • Corrupted OS filesystem requiring filesystem checking Errors in the OS partition which requiresre-installing OS files
Accessing the recovery system
The system recovery feature is contained in a separate boot image on the GDC server. Users will have to attach a keyboard to the GDC server beforepowering on the server, and interrupt the normal boot sequence to boot into the recovery system. The recovery system is designed to be used with a keyboard attached to the server. Note: Normal serveroperation cannot be carried out while the server is booted into the recovery system.
To exit from the recovery system, select ‘Reboot’ from the recovery system’s main menu (See Figure 2).
GDCTechnology Ltd.
Page 1 of 6
December 30, 2010
Booting into the recovery system
Follow the steps below to boot into the recovery system: 1. Attach a USB keyboard to the GDC server, using either theUSB ports on the front or rear panels. 2. Press the ‘Esc’ key during system boot to access the boot menu. 3. Select the ‘Rescue’ entry and press the ‘Enter’ key to boot into the recovery system (SeeFigure 1). 4. After the recovery system boots, the menu for the recovery system is displayed (See Figure 2).
Figure 1 GDC server boot menu
Figure 2 Main menu for recovery system
GDCTechnology Ltd.
Page 2 of 6
December 30, 2010
System recovery features
All features for the recovery system can be accessed through the main menu shown in Figure 2. Users can perform the followingactions while the recovery system is active: • • • • Create a system restore image Restore the system from a system restore image Manage system restore images Perform filesystem repair on an existing...
Leer documento completo
Regístrate para leer el documento completo.