Version 9 Lathe Tutorial
Mastercam Version 9.1 SP2 Lathe © 2003 CNC Software, Inc.
Mastercam Version 9 Lathe Tutorial (Metric version) Date: August 20, 2003 Copyright © 2002, 2003 CNC Software, Inc. - All rights reserved. First Printing: January 21, 2002 Second Edition: March 18, 2002 Software: Mastercam Lathe Version 9.1 SP2 ISBN: 1-883310-29-6
IMPORTANT NOTICE! PLEASEREAD THIS STATEMENT AND THE SOFTWARE LICENSE AGREEMENT COMPLETELY BEFORE USING THIS SOFTWARE. BY CONTINUING TO USE THIS SOFTWARE, YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY) INDICATE YOUR INTENTION TO BE BOUND BY AND ACCEPT THE TERMS AND CONDITIONS OF THIS SOFTWARE LICENSE. IF YOU DO NOT AGREE TO THESE TERMS AND CONDITIONS YOU MAY NOT ACCESS OR OTHERWISE USE THIS SOFTWARE AND WILL IN FACT BEPROHIBITED FROM DOING SO. THIS COMPUTER SOFTWARE MAY BE USED ONLY PURSUANT TO THE TERMS AND CONDITIONS SET FORTH BELOW, AND SOLELY IN CONJUNCTION WITH THE ACCOMPANYING SECURITY MECHANISM (UNLESS OTHERWISE SPECIFIED IN THE “EXCEPTIONS TO SECURITY MECHANISM REQUIREMENTS” SECTION OF SUCH TERMS AND CONDITIONS) WHICH MUST BE PRESENT ON YOUR COMPUTER (OR NETWORK AS APPLICABLE) AT ALL TIMES DURING SUCHUSE.
Software License CNC Software, Inc. (“CNC”) a Connecticut corporation with its principal place of business at 671 Old Post Rd., Tolland, Connecticut, 06084 hereby grants to you a non-exclusive, non-transferable license (the “License”) to use (and, if applicable, to permit your authorized employees to use), solely in accordance with the terms and conditions of this Software License Agreement,this software program (the “Program”) and any accompanying documentation (the “Documentation”) solely for your internal business purposes and solely in conjunction with the accompanying hardware or software device, method, scheme or other security measure provided by CNC which allows a user to access the Program and prevents unauthorized access to the Program (the “Security Mechanism”). (TheProgram, any updates to the Program, and the Documentation shall hereinafter collectively be referred to as the “Software”). Restrictions You may not use the Program without a Security Mechanism provided by CNC or CNC’s suppliers. When CNC or CNC’s suppliers provide you with a single-user Security Mechanism, the Program may only be used (in executable code form only) on a single computer to which theSecurity Mechanism is directly attached. In the event CNC or CNC’s suppliers provide you with a multiple-user Security Mechanism for use over an internal network (a “Network Security Mechanism”), the Program may be used: (a) in executable code form only; (b) only on end-user computers that are connected to the internal network to which the Network Security Mechanism is attached; and (c) only by thenumber of users and accessed by the number of end-user computers for which licenses were purchased and as further allowed by the Network Security Mechanism. You may physically transfer the Program from one computer equipped with a single-user Security Mechanism to another only if the Security Mechanism is included in the transfer and is installed with the new computer. You shall not: (a) copy(except as provided below), adapt, modify the Software; (b) publish, display, disclose or create a derivative work from the Software or any part thereof; (c) de-compile or translate, disassemble, create or attempt to create, by reverse engineering or otherwise, the source code form of the Program from the executable code of the Program; (d) remove any proprietary notices, labels or marks from theSoftware; (e) rent, lease, distribute or transfer all or any part of the Software to any person or entity without the prior written consent of CNC; (f) use the Software to provide outsourcing, service bureau, time sharing or other services to any third party; or (g) sublicense, assign, delegate or otherwise transfer your rights in the Software, under the Software License Agreement or any of the...
Leer documento completo
Regístrate para leer el documento completo.