Media search - senr9502 - c9 engine for caterpillar built machines

Solo disponible en BuenasTareas
  • Páginas : 2 (436 palabras )
  • Descarga(s) : 0
  • Publicado : 13 de junio de 2011
Leer documento completo
Vista previa del texto
Media Search - SENR9502 - C9 Engine For Caterpillar Built Machines

Page 1 of 4

Shutdown SIS Previous Screen
Product: NO EQUIPMENT SELECTED Model: NO EQUIPMENT SELECTED Configuration: NOEQUIPMENT SELECTED

Disassembly and Assembly
C9 Engine For Caterpillar Built Machines
Media Number -SENR9502-15 Publication Date -01/07/2008 Date Updated -01/08/2008

i03016430

Cylinder Head -Install
SMCS - 1100-012

Installation Procedure
Table 1 Required Tools Tool A B Part Number 138-7575 4C-5593 Part Description Link Bracket Anti-Seize Compound Qty 2 1

NOTICE
Keep all parts cleanfrom contaminants. Contaminants may cause rapid wear and shortened component life.

1. Position a new gasket on the engine.https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 06/13/2011

Media Search - SENR9502 - C9 Engine For Caterpillar Built Machines

Page 2 of 4

Illustration 1

g01142119

2. Attach Tooling (A) and a suitable liftingdevice to cylinder head (9) . The weight of cylinder head (9) is approximately 147 kg (325 lb). Position the cylinder head onto the dowels in the engine block. 3. Apply Tooling (B) to the threads of bolts(8) . Install bolts (8) . Refer to Specifications, "Cylinder Head" for the correct tightening procedure. Tighten the plugs (not shown) for the high pressure oil gallery on each end of the cylinderhead to the following torque 285 ± 25 N·m (210 ± 18 lb ft). 4. Connect the sensors. 5. Connect hose assemblies (6) and (7) .https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 06/13/2011

Media Search - SENR9502 - C9 Engine For Caterpillar Built Machines

Page 3 of 4

Illustration 2

g01063034

6. Connect hose (5) . 7. Install tube assembly (2) .8. Connect tube assemblies (3) and (4) . 9. Install accessory drive group (1) . 10. Fill the cooling system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations". End...
tracking img