Medico
“LoaderBox” - Parallel
Installation Instructions Rev.09.2011
Thank you for choosing the Masis Systems LoaderBox
The LoaderBox is a box that is installedbetween a standard PC system and an embroidery machine. The LoaderBox, when used with the Masis ECS software, allows you to send designs from your PC to the machine.
Please read the followingcarefully to install the LoaderBox
LOADERBOX SYSTEM COMPONENTS
LoaderBox with cables (DO NOT USE ANY OTHER CABLES)
ECS NET Software Diskette and User Guide
COMPUTER System requirements
|[pic]|The computer you intend to use with the LoaderBox should meet the following recommended hardware and |
| |software requirements. If you are not sure aboutyour computer, contact the supplier, manufacturer, or |
| |someone knowledgeable about the system to see if it meets the following specifications: |
|| |
A personal computer with an minimum 386, 486, Pentium, or 100%compatible processor
An operating system able to run MS-DOS® programs:
Microsoft Windows 98SE, 98, Me, Windows 95, MS-DOS V3.3 or higher
(Not XP or Win2000)
A hard disk drive (letterC:), with 2 MB free space for ECS (and more for designs)
At least one 3½” floppy disk drive
A Color VGA (or better) display card and monitor
A mouse, trackball, or compatible pointing device isrecommended
At least 2 megabytes of memory (RAM), available as ‘extended’ memory
To Prevent Damage to machine or LoaderBox -- You MUST switch OFF Main Power to Embroidery Machine and WAIT for at least onehalf of a minute before connecting OR disconnecting the LoaderBox cable to the machine.
Installing Masis Systems LoaderBox and SOFTWARE
1 Install LoaderBox
1. Place the LoaderBox in...
Regístrate para leer el documento completo.