Prueba de tension
Páginas: 5 (1217 palabras)
Publicado: 17 de marzo de 2011
DPH-SERIE Screwjak Pedestal for Commercial, Industrial and Institutional Applications
COMPRESSION TEST ON PEDESTALS “BUZON” DPH5
TEST REPORT N° GT 7660/01.
Number of pages: 4 Requested by: BUZON Pedestal International s.a. (BPI) Belgium Z I des Hauts Sarts, zone 1 Prolongement Abbaye, 134 - B 4040 Herstal - www.bpi.be
Date of report: 12-10-00
Description of the product tested: A. TheBuzon pedestals type DPH5, adjustable in height from 10 to 17 cm (with a corrector for slopes from 0 to 5% fixed on the head of the support), have a thickness of +/- 5 mm and are made up of 5 pieces: ( photo No. 1)
Slope corrector
Fixation for tray with slab separator tabs
Head, adjustable from –B to +B
-
A circular base (∅ 200 mm). A reverse threaded ring screwed into the supportbase. A circular head (∅ 150 mm). A corrector for slopes from 0 to 5 cm / metre fixed to the support head. - A tray with four slab separator tabs that can be fitted to the head of the support.
Photo No. 1 Details of the various parts of a BUZON DPH5 pedestal, adjustable from 10 to 17 cm, in polypropylene
Reverse threaded ring
B. For adjustments above 17 cm, the DPH5 pedestal can be fittedwith couplers, type C2/DPH5 (photo No. 2). The C2/DPH5 coupler, with a thickness of +/- 5 mm, is made up of a section with an outside thread that can be screwed into the reverse threaded ring and a section with an inside thread into which the head of the pedestal can be screwed. The DPH5 pedestal is adjustable: - with 1 coupler, from 17 to 29 cm - with 2 couplers, from 24 to 40 cm - with 3 couplers,from 32 to 52 cm - with 4 couplers, from 39 to 62 cm - with 5 couplers, from 46 to 75 cm
Circular base, adjustable from –A to +A
Coupler adjustable from – Z to + Z
Photo No. 3
Photo No. 2 Coupler, C2/DPH5, in polypropylene
Page 1/4 – GT 7660/01
www.buzon-world.com
DPH-SERIE Screwjak Pedestal for Commercial, Industrial and Institutional Applications
COMPRESSION TEST ONPEDESTALS “BUZON” DPH5
The various parts of the BUZON DPH5 pedestals and C2/DPH5 couplers are made of polypropylene loaded with 20 % talc. The supports are manufactured for use in the making of roofing terraces, podiums, plinths and raised false floors etc. Safe value of permitted maximum compression loading for DPH5 and C2/DPH5 - Safety level for pedestrian terraces: divide the value of load shownin the table by 2 - Safety level for raised false floors divide the value of load shown in the table by 4 Note: The BUZON DPH5 pedestals in polypropylene are not designed to support machines or equipment that may subject them to vibration 1.1 Method: The tests were carried out on a universal testing machine, type Instron 1185 n° H – 4573, with a capacity of 100 kN, fitted with a 100 kN forcetransducer No. 2518 – 201. The tests were carried out in accordance with the manufacturer's recommendations. The loading speed was 10 mm/min. The mean RUPTURE value, expressed in daN or en lbf, is the result of carrying out the test on 3 BUZON DPH5 supports and at different heights. 1.2 Test results 1.2.1 Load centred on the head of the pedestal
Height of the DPH5 Number of couplers 0 0 1 1 2 2 3 3 4 45 5 % setting of slope corrector 0% 5% 0% 5% 0% 5% 0% 5% 0% 5 0% 5% Adjustment of the sections -A -B -A -B -A –Z -B -A –Z -B -A-Z-Z-B -A-Z-Z-B -A-Z-Z-Z-B -A-Z-Z-Z-B -A-Z-Z--ZZ-B -A-Z-Z--ZZ-B -A-Z-Z—Z-ZZ-B -A-Z-Z—Z-ZZ-B Mean value of load at rupture, centered load daN lbf 1923 1710 1690 1637 1627 1597 1577 1540 1695 1522 1573 1403 4240 3770 3726 3608 3586 3520 3476 3395 3737 3355 3469 3094
←17 cm
17 cm
↑
28 cm
28 cm
→
39 cm
39 cm
↓
50 cm
50 cm
°
60 cm 60 cm
± The load was applied directly over the entire surface of the head of the BUZON DPH5 pedestal by a steel block
70 cm
70 cm
Note: 1 daN ~ 1 kgf ~2.23 lbf Page 2/4 - GT 7660/01
www.buzon-world.com
DPH-SERIE Screwjak Pedestal for Commercial, Industrial and Institutional...
COMPRESSION TEST ON PEDESTALS “BUZON” DPH5
TEST REPORT N° GT 7660/01.
Number of pages: 4 Requested by: BUZON Pedestal International s.a. (BPI) Belgium Z I des Hauts Sarts, zone 1 Prolongement Abbaye, 134 - B 4040 Herstal - www.bpi.be
Date of report: 12-10-00
Description of the product tested: A. TheBuzon pedestals type DPH5, adjustable in height from 10 to 17 cm (with a corrector for slopes from 0 to 5% fixed on the head of the support), have a thickness of +/- 5 mm and are made up of 5 pieces: ( photo No. 1)
Slope corrector
Fixation for tray with slab separator tabs
Head, adjustable from –B to +B
-
A circular base (∅ 200 mm). A reverse threaded ring screwed into the supportbase. A circular head (∅ 150 mm). A corrector for slopes from 0 to 5 cm / metre fixed to the support head. - A tray with four slab separator tabs that can be fitted to the head of the support.
Photo No. 1 Details of the various parts of a BUZON DPH5 pedestal, adjustable from 10 to 17 cm, in polypropylene
Reverse threaded ring
B. For adjustments above 17 cm, the DPH5 pedestal can be fittedwith couplers, type C2/DPH5 (photo No. 2). The C2/DPH5 coupler, with a thickness of +/- 5 mm, is made up of a section with an outside thread that can be screwed into the reverse threaded ring and a section with an inside thread into which the head of the pedestal can be screwed. The DPH5 pedestal is adjustable: - with 1 coupler, from 17 to 29 cm - with 2 couplers, from 24 to 40 cm - with 3 couplers,from 32 to 52 cm - with 4 couplers, from 39 to 62 cm - with 5 couplers, from 46 to 75 cm
Circular base, adjustable from –A to +A
Coupler adjustable from – Z to + Z
Photo No. 3
Photo No. 2 Coupler, C2/DPH5, in polypropylene
Page 1/4 – GT 7660/01
www.buzon-world.com
DPH-SERIE Screwjak Pedestal for Commercial, Industrial and Institutional Applications
COMPRESSION TEST ONPEDESTALS “BUZON” DPH5
The various parts of the BUZON DPH5 pedestals and C2/DPH5 couplers are made of polypropylene loaded with 20 % talc. The supports are manufactured for use in the making of roofing terraces, podiums, plinths and raised false floors etc. Safe value of permitted maximum compression loading for DPH5 and C2/DPH5 - Safety level for pedestrian terraces: divide the value of load shownin the table by 2 - Safety level for raised false floors divide the value of load shown in the table by 4 Note: The BUZON DPH5 pedestals in polypropylene are not designed to support machines or equipment that may subject them to vibration 1.1 Method: The tests were carried out on a universal testing machine, type Instron 1185 n° H – 4573, with a capacity of 100 kN, fitted with a 100 kN forcetransducer No. 2518 – 201. The tests were carried out in accordance with the manufacturer's recommendations. The loading speed was 10 mm/min. The mean RUPTURE value, expressed in daN or en lbf, is the result of carrying out the test on 3 BUZON DPH5 supports and at different heights. 1.2 Test results 1.2.1 Load centred on the head of the pedestal
Height of the DPH5 Number of couplers 0 0 1 1 2 2 3 3 4 45 5 % setting of slope corrector 0% 5% 0% 5% 0% 5% 0% 5% 0% 5 0% 5% Adjustment of the sections -A -B -A -B -A –Z -B -A –Z -B -A-Z-Z-B -A-Z-Z-B -A-Z-Z-Z-B -A-Z-Z-Z-B -A-Z-Z--ZZ-B -A-Z-Z--ZZ-B -A-Z-Z—Z-ZZ-B -A-Z-Z—Z-ZZ-B Mean value of load at rupture, centered load daN lbf 1923 1710 1690 1637 1627 1597 1577 1540 1695 1522 1573 1403 4240 3770 3726 3608 3586 3520 3476 3395 3737 3355 3469 3094
←17 cm
17 cm
↑
28 cm
28 cm
→
39 cm
39 cm
↓
50 cm
50 cm
°
60 cm 60 cm
± The load was applied directly over the entire surface of the head of the BUZON DPH5 pedestal by a steel block
70 cm
70 cm
Note: 1 daN ~ 1 kgf ~2.23 lbf Page 2/4 - GT 7660/01
www.buzon-world.com
DPH-SERIE Screwjak Pedestal for Commercial, Industrial and Institutional...
Leer documento completo
Regístrate para leer el documento completo.