Rpm Corte

Solid-State Counter/Timer
1/16 DIN, Easy-to-Operate Combination Counter and Timer
I I

H8CA-S

I I I I

Operation selectable as preset counter or timer 6-digit LCD display— Present Value: 8 mm (0.32 in) Set Value: 4 mm (0.16 in) Nonsignificant zeros suppressible from preset or count value display Selectable power supply voltages 24 to 240 VAC and 12 to 120 VDC Memory protection 4programmable output modes available for both counter and timer functions

Ordering Information
I

Counter/Timer
Surface/flush mounting Preset counter/timer (selectable) Counter: reversible (Three input modes and four operating modes are selectable) Timer: time-limit operation, integrating operation (Four operating modes are selectable) Provided: Approx. 10 years at 20° C (68° F) 0 to 999999 (6digits) 0.00 to 9999.99 s, 0.0 to 99999.9 min., 0.0 to 99999.9 h (6 digits) Socket 6-digit backlit LCD; 8 mm (0.32 in) Present Value, 4 mm (0.16 in) Set Value No-voltage input (See Note.) Voltage input (solid-state/contact input) Contact Solid-state Contact Solid-state H8CA-SAL H8CA-SALS H8CA-SALV H8CA-SALVS H8CA-SAH H8CA-SAHS H8CA-SAHV H8CA-SAHVS H8CA-SDL H8CA-SDLS H8CA-SDLV H8CA-SDLVS H8CA-SDHH8CA-SDHS H8CA-SDHV H8CA-SDHVS

Mounting style Operating function Operating system (mode)

Backup power supply for memory protection Number of counts Timing ranges External connection Display type Count and reset input for counter function; reset and gate input for timer function Control output Power supply/ AC 30 cps counting speed 1 kcps DC 30 cps 1 kcps Note:

Do not use the contact input at acounting speed of 1 kcps.

1

H8CA-S
I

H8CA-S

Accessories (Order Separately)
11-pin Bottom surface or track mounting, top screw terminals Bottom surface or track mounting, top screw terminals, finger safe terminal conforms to VDE0106/P100 Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals Fits behind panel, ideal for side-by-side installation. UseP3G❑-❑sockets Waterproof front cover DIN rail, 50 cm (1.64 ft) length; 7.3 mm thick DIN rail, 1 m (3.28 ft) length; 7.3 mm thick DIN rail, 1 m (3.28 ft) length; 16 mm thick Part number P2CF-11 P2CF-11-E P3GA-11 Y92F-30 Y92A-48N PFP-50N PFP-100N PFP-100N2 PFP-M PFP-S

Description Sockets

Panel mounting adapter NEMA 4 cover Mounting track

End plate Spacer

Specifications
I

Ratings
AC DC

Supplyvoltage

24 to 240 VAC, 50/60 Hz 12 to 120 VDC (20% max. permissible ripple) Operating voltage range 90 to 110% of rated voltage Power consumption (See Note 1.) Approx. 2.2 VA (at 240 VAC, 50 Hz) Approx. 1 W (at 120 VDC) Max. counting speed of CP1 and CP2 In counter function mode: 30 cps (contact and solid-state inputs): Minimum pulse width: 16.7 ms (ON/OFF ration: 1:1) 1 kcps (solid-state input):Minimum pulse width: 0.5 ms (ON/OFF ratio: 1:1) Reset system External reset (common to contact and solid-state inputs) and manual reset Minimum reset signal width: 20 ms Start and gate response time In timer function mode: Start and gate response time (common to contact and solid-state inputs): L-type: 16.5 ms H-type: 0.5 ms Count and reset inputs for counter No-voltage input: (See Note 2.)function/ start and gate inputs for timer function Maximum short-circuit impedance: 1 kΩ Short-circuit residual voltage: 0.5 V max. (1.3 V max.) Minimum open impedance: 100 kΩ Voltage input: 5 to 30 V at “High” level 0 to 2 V at “Low” level Input impedance: Approx. 4.7 kΩ Control output Contact output type: SPDT 250 VAC 3 A p.f.=1 (resistive load) Solid-state ouput type: Open collector 30 VDC max. 100mA max. Approvals UL / CSA / SEV Note: 1. On power application, the following inrush current flows for 0.5 ms. 3.7 A at 240 VAC, 2.3 A at 120 VDC 2. The source current output from each input terminal when using no-voltage input is 2 mA max.

2

H8CA-S
I

H8CA-S

Characteristics
±0.05% ±0.05 s ±0.1% ±0.005 s ±0.05% ±0.05 s max.

In timer Repeat accuracy function mode Setting error...