Azucar

Analytical Evaporators

Analytical Evaporators
The FlexiVap™ Work Station is a new line of analytical nitrogen/air evaporators developed by Yongsong Huang of Brown University and licensed/manufactured by Glas-Col, LLC. The key advantages are:

    

One manifold suits all standard size vials Easy closure of any manifold position Reduced nitrogen consumption Complete even flowrates in all ports Cost effective compared with existing models on the market.

They are low cost, small footprint instruments used to concentrate chemical and biochemical solutions for further analysis, or evaporate to dryness for further reactions. What makes these systems unique is the ability to open or close each position by turning the knobs on the manifold and the rack and pinion precisionlab stand. Digital temperature control to 100o C is available on certain models. Product Weight (lbs) 
15  15  20  25  20  25  3  3  3  3  3  2  2  4  2  4  4  4 

Catalog Number  Description 
109A YH-1*  109A YH-2*  109A YH-1-12*  109A YH-2-12*  109A YH-1-24*  109A YH-2-24*  109A YH-4812  109A YH-4815  109A YH-4816-15  109A YH-4828  FlexiVap Work Station, no heating for small insert, 24positions with flowmeter.  FlexiVap Work Station, no heating for larger insert, 48 positions with flowmeter.  FlexiVap Work Station with heating for small insert, 24 positions with flowmeter.  FlexiVap Work Station with heating for larger insert, 48 positions with flowmeter.  FlexiVap Work Station with heating for small insert, 24 positions with flowmeter.  FlexiVap Work Station with heating for largerinsert, 48 positions with flowmeter.  Aluminum Insert Block with 48 positions for up to 12 mm vials (Use with large system)  Aluminum Insert Block with 48 positions for 15 mm to 16mm vials (Use with large system)  Aluminum Insert Block with 48 positions for 15ml Centrifuge tubes (Use with large system)  Aluminum Insert Block with 24 positions for up to 28mm vials, EPA (Use with large system) Voltage 
N/A  N/A  120  120  240  240  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  120  240 

Max PSI 
50  50  50  50  50  50  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A 

Aluminum Insert Block with 24 positions for 50ml Centrifuge tubes 109A YH-4829-50  (Use with large system)  109A YH-2412  109A YH-2416  Aluminum Insert Block with 24 positions for up to 12mm vials(Use with small system)  Aluminum Insert Block with 24 positions for 15mm to 16mm vials (Use with small system) 

Aluminum Insert Block with 24 positions for 15ml Centrifuge tubes 109A YH-2416-15  (Use with small system)  109A YH-2428  Aluminum Insert Block with 12 positions for up to 28mm vials, EPA (Use with small system) 

Aluminum Insert Block with 12 positions for 50ml Centrifuge tubes 109AYH-2429-50  (Use with small system)  109A YH12  109A YH24  Bottom Heat plate only with digital control, 100oC Max  Bottom Heat plate only with digital control, 100oC Max, supplied with CEE/7 power cord 

* does not include insert for vials, must be ordered separately Contact Glas-Col for other block sizes

Analytical Evaporators
  Knobs to turn flow  on/off for each posi‐ Rack & Pinion Drive Metal luer locks and 

Flow meter 

Op onal heat source  for samples 

FlexiVap  If your laboratory conducts research in any of the following areas, environmental organic analysis, organic analytical chemistry, petroleum analysis, food chemistry, forensic organic analysis, organic geochemistry, and any scientific research that requires solvent reduction. FlexiVap can greatly increase yourlab productivity, especially if your research requires processing large numbers of samples. You or your students will never again have the mess of setting and dragging the pipettes or needles around in a nitrogen manifold, with just one FlexiVap in your lab.

The main advantages of the device relative to those currently on the market are: - Fully flexible with all vial sizes used in a lab,...