Calentador de rodamiantoas skf

SKF TIH 030m

Instructions for use

2

SKF TIH 030m

Table of contents
EU-DECLARATION OF CONFORMITY ..................................................4 SAFETY RECOMMENDATIONS .............................................................5 1. INTRODUCTION ..................................................................................6 1.1 Intendeduse................................................................................6 1.2 Principle of operation...................................................................6 1.3 Distinguishing features ................................................................7 2. DESCRIPTION .....................................................................................7 2.1 Components................................................................................7 2.2 Technical data .............................................................................8 3. INSTALLATION OF MAINS PLUG......................................................9 4. PREPARATION FOR USE...................................................................9 5. OPERATION......................................................................................10 5.1 Function of displays...................................................................10 5.2 Function of buttons ....................................................................10 5.3 TEMP MODE.............................................................................11 5.4 TIME MODE ..............................................................................12 5.5Temperature measurement .......................................................12 5.6 Change of temperature unit.......................................................12 5.7 Demagnetisation .......................................................................12 5.8 Power level selection.................................................................13 6. SAFETY FEATURES.........................................................................13 7. TROUBLESHOOTING .......................................................................14 8. SPARE PARTS ..................................................................................15

SKF TIH 030m

3

EU-DECLARATION OF CONFORMITY

We, SKF Maintenance Products, Kelvinbaan 16, 3439 MT Nieuwegein, declare that the

INDUCTION HEATER TIH030m

is designed and manufactured in accordance with the EUROPEAN LOW VOLTAGE DIRECTIVE 73/23/EEC EMC NORM 89/336/EEC, outlined in harmonised Norms VDE 0721 EN 55011 EN 61000-6-2 EN 61000-3-2/3.2

The Netherlands, 20 August 2004

Ebbe Malmstedt Manager Product Development and Quality

4

SKF TIH 030m

SAFETY RECOMMENDATIONS
Because the TIH 030m generates a magnetic field, peoplewearing a pacemaker must not be within 5 m (16 ft) of the TIH 030m during operation. Electronic equipment, such as wristwatches, may also be affected. Follow the operating instructions at all times. Be certain that the voltage supply is correct. Electrical arcing may occur when a potential difference exists between the TIH 030m and the workpiece. This is not dangerous to human beings and will notcause damage to the TIH 030m or the workpiece. However, the TIH 030m must never be used in areas where there is a risk of explosion. Do not expose the TIH 030m to high humidity. Never operate the TIH 030m without a yoke in position. Never operate the TIH 030m with the cable of the remote control between the vertical supports of the yoke. Do not modify the TIH 030m. Use proper handling equipment whenlifting heavy workpieces. Avoid contact with hot workpieces. Wear the supplied heat resistant gloves to handle hot workpieces.

SKF TIH 030m

5

1. INTRODUCTION
The SKF TIH 030m induction heater is designed to heat bearings that are mounted with an interference fit onto a shaft. The heat causes the bearing to expand, which eliminates the need to use force during installation. A 90 °C...