Ciencia

CSWA/CSWP Sample Test Contents
CSWA Basic Part Sample ............................................................. 2 CSWA – CSWP Advanced Part Model ......................................... 4 CSWAAssembly Model ............................................................... 6 CSWP Assembly Model ............................................................... 9 COSMOSXpress Sample............................................................ 18 Answers .................................................................................... 21

CSWA Basic Part Sample

Question: 1

Modelthe part shown using SolidWorks. Units: Inches Decimal places: 2 Origin: Arbitrary location All holes through all Material: Copper Density: 0.32 pounds per cubic inch What is the mass of the finishedpart in pounds? A. 2.28 B. 5.66 C. 1.34 D. 7.21

CSWA – CSWP Advanced Part Model Sample

Question: 1

Model the part shown in bottom right using SolidWorks. Units: Inches Decimal places: 2Origin: Arbitrary location Some dimensions for the part can be found in the views that are not modeled. All holes through all Material: Plain carbon steel Density: 0.28 pounds per cubic inch What is themass of the finished part in pounds? A. 10.46 B. 15.43 C. 22.34 D. 13.76

CSWA Assembly Model Sample

Question: 1

Build this assembly in SolidWorks. It has 4 pivots (dark gray), 2 posts(red), 1 rivet (orange) and 2 swivels (light gray). Mate the assembly as shown in the image. Unit system: IPS (inch, pound, second) Decimal places: 3 Where is the center of mass if the assembly origin isin the center of the lower red cube, the assembly planes are all parallel to the lower red cube part planes and all of the parts are made of material with the same density? (Coordinates given as X, Y,Z) A) 1.356, -0.443, 2.567 B) -0.323, 2.056, 0.0320 C) 0.751, 1.554, -0.511 D) 0.840, 1.629, -0.426

CSWP Assembly Model Sample

Question: 1

Design this part in SolidWorks. Name the part...