Solo disponible en BuenasTareas
  • Páginas : 42 (10455 palabras )
  • Descarga(s) : 0
  • Publicado : 29 de septiembre de 2010
Leer documento completo
Vista previa del texto

Quick Install Guide+ Installationsanleitung+ Guide d’installation+ Guía de instalación+ Guida di Installazione+ Installatiehandleiding+ Instrukcja instalacji+ Instalační příručka+ Telepítési Segédlet+ Installasjonsveiledning+ Installationsvejledning+ Asennusopas+ Installationsguide+ Guia de Instalação+ Οδηγός Γρήγορης Εγκατάστασης το+

Quick InstallationGuide

Package Contents
If any of the items are missing, please contact your reseller.

DIR-300 Wireless G Router

CD-ROM (D-Link Click’n’Connect. Manual and Warranty)

Ethernet (CAT5 UTP) Cable Note :

Power Adapter

Default IP: 9.68.0. Default Username: Admin Default Password:

Using a power supply with a different voltage rating will damage and voidthe warranty of this product.

Quick Installation


Remove the D-Link Click and Connect CD.


A. Be sure your Internet connection is active. DO NOT plug the router in yet. B. Insert the D-Link Click’n Connect CD into your computer.

C. Click

1. How do I configure my DIR-300 router without the CD, or check my Wireless Network Name (SSID) and Wireless Encryption Key? • Connect yourPC to the router using an Ethernet cable. • Open a web browser and enter the address http://9.68.0. • The default username is ‘admin’. The default password is ‘’ (leave the field blank). • If you have changed the password and can not remember it, you will need to reset the router to set the password back to ‘’ (leave the field blank). 


2. How do I reset my DIR-300router to factory default settings? • Ensure the router is powered on. • Press and hold the reset button on the rear of the device for 0 seconds. Note: Resetting the router to factory default will erase the current configuration settings. To re-configure your settings, log into the router as outlined in question , then run the Setup Wizard. 3. How do I add a new wireless client or PC if I haveforgotten my Wireless Network Name (SSID) or Wireless Encryption Key? •Every PC that needs to connect to the router wirelessly, you will need to ensure you use the correct Wireless Network Name (SSID) and encryption key. •Use the web based user interface (as described in question  above) to check or choose your wireless settings. •Make sure you take a note of the settings so that you can enter theminto each wirelessly connected PC. D-Link has provided a handy sticker for you to note them down and attach to your router, or other location you find most convenient. 4. What can I do if my router is not working correctly? •Check the LED’s on the front of the router. The Power, Wireless and Internet LED should be on. One or more of the LAN LED should flash. •Check that all the cables are firmlyconnected at both ends. •Power the router off for 0 seconds, and then power it back on. 5. What can I do if I can’t get a Wireless Connection with my Laptop or PC? •Try running the Wireless in the same room first with line of sight to the Router. •Check all your Wireless cards are enabled on the Laptop and PCs you wish to use. If your Laptop has built in Wireless please check it is enabled. As it mayrequire a particular switch or key-press to enable the wireless function. 6. Why can I not get an Internet Connection? •For Cable users make sure Clone MAC address option is ticked during Wizard installation (or enter the registered MAC) and make sure the service has been enabled/connected and is operational. •For ADSL users please contact your ISP to make sure the service has beenenabled/connected by your ISP and that your ISP username and password is correct. Note: If you are unable to connect, see the Troubleshooting chapter of the product manual in the D-Link CD. Technical Support Thank you for choosing D-Link products. For further information, support, product updates or to download the User Manual please visit the D-Link website at
tracking img