Guía vagcom

VCDS Release 805 PDF Manual Printing Instructions:

You should tell your PDF reader to "Fit to Printable Area" or use similar instructions when printing in order to make the images and text as legible as possible.

User’s Manual
Diagnostic Software for VW/Audi/SEAT/Skoda

Release 805
Copyright (c) 2000-2008 by Ross-Tech, LLC. 881 Sumneytown Pike Lansdale, PA 19446 +1-267-638-2300www.Ross-Tech.com

Disclaimer: All rights reserved, No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Ross-Tech, LLC. The information contained herein is designed only for use with VCDS diagnostic software. Ross-Tech, LLC. is notresponsible for any use of this information as applied to this or other diagnostic equipment. Neither Ross-Tech, LLC. nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations tothis product, or failure to comply with Ross-Tech, LLC’s written instructions. By using VCDS, you acknowledge that this Program is provided "as is" and "with all faults, defects and errors" and that all use of the Program is at your own full risk. It has been extensively tested, but we cannot guarantee it will work correctly with every system in every car. We will make our best effort to fix anybugs and to enhance the program, but we specifically disclaim any liability for damage to your computer or your car, and we do not promise to have any particular enhancements available on any specific date.

Copyright © 2008 by Ross-Tech, LLC

VCDS Table of Contents
Subject Getting Started Main Screen Select Control Module Open Controller Fault Codes Measuring Blocks Data Logging SingleReading Supported Codes Readiness Advanced Identification Advanced Measuring Blocks Acceleration Measurement Login 7-digit PIN/SKC Dialog Basic Settings Output Tests Recode / Long Coding Adaptation Security Access Auto-Scan Control Module Finder Generic OBD2 Applications Transport Mode Controller Channels Map EDC-15 Mileage SRI Reset Optical Bus Diagnostics Options About Problems & Issues FAQ(Frequently Asked Questions) VC-Scope TDI Timing Checker VAG Functions Section 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

VCDS - Getting Started - Section 1-A
Thank you for purchasing VCDS, which allows you to turn a Windows PC into a powerful diagnostic tool for VW/Audi/SEAT/Skoda vehicles from 1990 through the latest models.

Read This First!Before plugging anything in, you must first install VCDS software on your PC.

Step #1
Go to our website and click on Download at the top of the screen to download and install the latest version of VCDS: www.Ross-Tech.com

Run the installation file that you have downloaded and follow the onscreen instructions and allow VCDS to install in its default directory. ►

The VCDS Pro-Kit comeswith a CD containing our software as well. If possible it is always a good idea to download the latest version from our website.

◄Step #2
Connect the Serial end of your Serial Interface or the USB end of your USB Interface to the correct port on your PC. If your PC is further from the vehicle’s diagnostic port than 6 feet, connect an approved Extension Cable between the PC and the Interface. Theappropriate extension is included in the ProKit and additional ones are available from our web store.

Getting Started - Section 1-B

Step #3 (USB Only) ►
If you are using a Serial Interface then you can proceed to step #4. If you are using a USB Interface, a message like this should pop up: ► Click on the Found New Hardware message and the Found New Hardware Wizard should start up. If you...